[FREAKNAZTY]

oh and just to let you know i didnt drill it out the same size as the valve cover tube i did it a little smaller that way it made a tight seal , and the clamp that comes with it does fit its just kinda a %^$#^ to get on lol , well on my setup anyway lol

and not a problem bud believe you me if there's a cheap way to do any mods im hip to them lol

[jjjferro]

Did it. Will post pics tomorrow, got dark. Cost was under $20. Thanks again Freaknazty

[LeiraHoward]

Originally Posted by stlwagon

With your help he can't go wrong!

Actually, he got it all hooked up in the half hour or so between when he gets home from work and when I get home from work. He didn't need any help. Looks good. We'll have to post pics later.

[s2babe]

ok, sorry for the delay, but I got the pictures.
The hoses are that long to avoid kinks (and any other rock bands that might be around ).

The second (blurry) pic shows how much oil I collected just from driving around since I put it on Friday evening. That's an awful lot...

[stlwagon]

Much, much better! How many miles for that much oil? I used to get about that much per 100 miles.

[05stroker]

Originally Posted by s2babe

not according to my book...

it clearly says that the PCV pipe is the one on the passenger side, running to the intake tube...

unless the picture is wrong...

All I know is if you run two breathers with the pcv system is caped all the oil vapor comes from the pass side.

[s2babe]

Originally Posted by stlwagon

Much, much better! How many miles for that much oil? I used to get about that much per 100 miles.

that was probably about 90-100 miles, give or take a few.

I was very surprised at how much was collected.

Thanks again for your help.

[stlwagon]

Originally Posted by s2babe

that was probably about 90-100 miles, give or take a few.

I was very surprised at how much was collected.

Thanks again for your help.

That's perfectly normal. That comes from having no actual PCV valve on the car. .