Ok I cancelled the Earls Performance hose and ordered some Aeroquip Socketless black hose with a 28" HG rating. ANy comments on whether this is good or not? I dont want to do Stainless braided hose as it will really not match anything under the hood.
__________________
2005 Ford Mustang GT Torch Red Manual
Saleen Supercharger 3.4 pulley/Brenspeed Tune
FRPP Stingers Axleback Muffler System
CHE Lower Control Arms
Pro-5.0 Super Shifter
CDC Sequential Tail Lights
Best ET NA: 13.408 @ 105.31
Best SC: 12.6 @ 114 on Pirellis
Ok I cancelled the Earls Performance hose and ordered some Aeroquip Socketless black hose with a 28" HG rating. ANy comments on whether this is good or not? I dont want to do Stainless braided hose as it will really not match anything under the hood.
i ordered some stainless steel braided hydraulic hose from Jeggs a while back. I currently have the oil separator sitting in my garage cause i kept throwing code P0171 with it on. Anyone have advice on how to connect it better so i don't form any vacum leaks like it is currently doing?
Did you add new adapters to the can? If so did you use teflon tape or thread sealer? If not it might not be air tight. Also make sure you didnt damage the black O ring on the can where you screw it together.
__________________
2005 Ford Mustang GT Torch Red Manual
Saleen Supercharger 3.4 pulley/Brenspeed Tune
FRPP Stingers Axleback Muffler System
CHE Lower Control Arms
Pro-5.0 Super Shifter
CDC Sequential Tail Lights
Best ET NA: 13.408 @ 105.31
Best SC: 12.6 @ 114 on Pirellis
