Is it possible to adjust ,SHIM, gears AFTER they have been heat cycled? The wear pattern in dead on, and lash seems good. Found no metal shavings in rear last time it was opened. But if I take it to another shop, can it be fine tuned?
__________________
2009 Vapor silver GT Glass roof, 5 speed, Hurst short throw, SCT custom tune by Chris at Excessive Motor sports VA, JLT CAI, Steeda UDP,Steeda fixed LCA's, Boom tubes axel backs, Ford racing 3.73's. 300.54 HP and 310.88 TQ RWHP.
I have six dead bolt locks on my front door. when i leave the house i lock every other one, that way no matter how much someone picks them, they are always locking three.
Is it possible to adjust ,SHIM, gears AFTER they have been heat cycled? The wear pattern in dead on, and lash seems good. Found no metal shavings in rear last time it was opened. But if I take it to another shop, can it be fine tuned?
Why do you want to do that?
__________________
07 REDFIRE GT 5 SPEED 3.55 gears
C&L Racer CAI XCAL2/Seq signals/GTAs/Steeda UDP/CHE K Member Brace W/Torq Links/J&M LCA/Spider DS/PRO.50 Shifter Hurst handle & "T"/Meziere EO2/ARH LT catted H /Prothane MM/Delet Plates/SLP BOSS 429 Scoop/Accel COP/PowerSlot/Hawk Pads/Tokico D-Spec/CHE Panhard Bar Brace/Steeda Adj. Panhard Bar/BMR F/R Sway Bars/Cervini ducktail spoiler/BMR UCA Mount/CHE UCA/GT\CS Rear Cover/AMChrome Bullets 18x9/10s/Nitto 255/45&295/45
Tillman Dyno Tune 307HP/322TQ
Is it possible to adjust ,SHIM, gears AFTER they have been heat cycled? The wear pattern in dead on, and lash seems good. Found no metal shavings in rear last time it was opened. But if I take it to another shop, can it be fine tuned?
No.......................
__________________
I get asked why I carry a gun. I tell them its because stabbing people is gross.
Yes this is a noise thing...so I guess I am getting new gears.
__________________
2009 Vapor silver GT Glass roof, 5 speed, Hurst short throw, SCT custom tune by Chris at Excessive Motor sports VA, JLT CAI, Steeda UDP,Steeda fixed LCA's, Boom tubes axel backs, Ford racing 3.73's. 300.54 HP and 310.88 TQ RWHP.
And friction modifier. (I believe 4 oz. but double check)
Been there done that...even put BG gear lube in in the rear. Still a sound like a truck tire whirring at 40mph. Then at 65 and up it turns to a true high pitched whine.
__________________
2009 Vapor silver GT Glass roof, 5 speed, Hurst short throw, SCT custom tune by Chris at Excessive Motor sports VA, JLT CAI, Steeda UDP,Steeda fixed LCA's, Boom tubes axel backs, Ford racing 3.73's. 300.54 HP and 310.88 TQ RWHP.
Gear adjustment advice. 
