AFM Web

Go Back   Ford Mustang Forums > Mustang Forums > 2005 + Mustang > 2005+ Mustang GT Tech
Welcome to AllFordMustangs.com. We look forward to you registering on our forum and making your first post.
 
Introductions | Lounge | 2005+ GT Tech | 2005+ V6 Tech | 2005+ Talk | Mustang Tech | Racing | Regional 
 

Reply
 
Old 06-18-2009   #1 (permalink)
musstangs is offline Rookie


Joined: May 2009
Posts: 26 Threads: 3
 musstangs's Country Flag  View musstangs's 8 photos
Fishers   Indiana
Default Front led turn signals will not flash properly. Any help?

I have a 2006 mustang GT and i recently installed 2 stage led turn signals in the front. sometimes they blink perfectly, sometimes they think they are burnt out and the back lights will flash fast. they seem to be right on the edge off that power load enough for the relay to think its a good bulb. is there anything i could do to get them to work properly 100% of the time? If anyone out there has had the same problem and has corrected it. Please, please, any advice would be much appreciated. thanks,
musstangs is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-18-2009   #2 (permalink)
pcfrisch is offline Forums Moderator


Joined: Feb 2005
Posts: 15,401 Threads: 580
 pcfrisch's Country Flag  View pcfrisch's 10 photos
Southeastern   Michigan
Send a message via Yahoo to pcfrisch
Default

It has a lot to do with the current draw, you are right about being right on the edge. The computer does the work rather than a flasher. There is a current draw range.
Are these bulbs designed for the 05+?
__________________
2006 GT Tungsten Grey 5 spd, Xcal2/Pipeline CAI, Powerhouse tune. Spoiler delete. Front Speakers:Infinity 6812CF;Blaupunkt GTc652. Rear:Infinity Kappa 682.7CF. H/U:Alpine CDA-9885. Alpine MRP-F250 amp. Sequentials. President of the Splash guard registry. On Deck: Motoblue UDP's.
pcfrisch is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-18-2009   #3 (permalink)
musstangs is offline Rookie


Joined: May 2009
Posts: 26 Threads: 3
 musstangs's Country Flag  View musstangs's 8 photos
Fishers   Indiana
Default

I don't think they are, thats part of the problem I'm sure. But they are so close to working perfectly.
musstangs is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-18-2009   #4 (permalink)
stangcrosser is offline Made Member

S197 Member


Joined: Jan 2006
Posts: 447 Threads: 15
 stangcrosser's Country Flag
Hilo   Hawaii
Default

You may need to install a resistor in parallel for each of the LED bulbs. Then the current draw will be comperable to the filamet bulbs and the flash rate shoulb be reliable. Places that sell the LEDs will also sell the resistors. You can ask for a resistor appropriate to the 06 Mustang with the style and number of LEDs in each bulb that you have installed.
__________________
'06 GT, manual, Satin Silver, lt. grey cloth int., IUP.
MODIFICATIONS - Goodyear F1 GS-D3s; 245/45 on 18x9, 275/40 on 18x10| Progress Technology springs & sway bars| Steeda adj. panhard bar, panhard brace, front control arm brace & bushings| strut tower brace| Tokico D-Spec dampers| CHE adj. LCAs & BMR relocation brackets |drilled & slotted front rotors| C&L intake| BamaChips SCT tune| FRPP 4.10 ring & pinion| Pypes off road H-pipes| FRPP GTA mufflers.
stangcrosser is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-19-2009   #5 (permalink)
musstangs is offline Rookie


Joined: May 2009
Posts: 26 Threads: 3
 musstangs's Country Flag  View musstangs's 8 photos
Fishers   Indiana
Smile

cool, thanks! resistors... ill have to check those out, and see if they work.
musstangs is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-19-2009   #6 (permalink)
travelers is offline Top Dog

S197 Member


Joined: Sep 2006
Posts: 10,043 Threads: 64
 travelers's Country Flag  View travelers's 14 photos
Eastern   Pennsylvania
Default

Quote:
Originally Posted by stangcrosser View Post
You may need to install a resistor in parallel for each of the LED bulbs. Then the current draw will be comperable to the filamet bulbs and the flash rate shoulb be reliable. Places that sell the LEDs will also sell the resistors. You can ask for a resistor appropriate to the 06 Mustang with the style and number of LEDs in each bulb that you have installed.
+1 on the resistors with leds
__________________
07 REDFIRE GT 5 SPEED 3.55 gears
C&L Racer CAI XCAL2/Seq signals/GTAs/Steeda UDP/CHE K Member Brace W/Torq Links/J&M LCA/Spider DS/PRO.50 Shifter Hurst handle & "T"/Meziere EO2/ARH LT catted H /Prothane MM/Delet Plates/SLP BOSS 429 Scoop/Accel COP/PowerSlot/Hawk Pads/Tokico D-Spec/CHE Panhard Bar Brace/Steeda Adj. Panhard Bar/BMR F/R Sway Bars/Cervini ducktail spoiler/BMR UCA Mount/CHE UCA/GT\CS Rear Cover/AMChrome Bullets 18x9/10s/Nitto 255/45&295/45
Tillman Dyno Tune 307HP/322TQ
travelers is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-19-2009   #7 (permalink)
stangcrosser is offline Made Member

S197 Member


Joined: Jan 2006
Posts: 447 Threads: 15
 stangcrosser's Country Flag
Hilo   Hawaii
Default

I have found autolumination.com to be a good resource. They have a huge varitey of bulbs, related products and technical information.
__________________
'06 GT, manual, Satin Silver, lt. grey cloth int., IUP.
MODIFICATIONS - Goodyear F1 GS-D3s; 245/45 on 18x9, 275/40 on 18x10| Progress Technology springs & sway bars| Steeda adj. panhard bar, panhard brace, front control arm brace & bushings| strut tower brace| Tokico D-Spec dampers| CHE adj. LCAs & BMR relocation brackets |drilled & slotted front rotors| C&L intake| BamaChips SCT tune| FRPP 4.10 ring & pinion| Pypes off road H-pipes| FRPP GTA mufflers.
stangcrosser is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-20-2009   #8 (permalink)
musstangs is offline Rookie


Joined: May 2009
Posts: 26 Threads: 3
 musstangs's Country Flag  View musstangs's 8 photos
Fishers   Indiana
Default

+1 on the resistors with leds???
musstangs is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-21-2009   #9 (permalink)
AvroAero is offline Rookie


Joined: Apr 2009
Posts: 28 Threads: 4
 AvroAero's Country Flag
Toronto   Ontario
Default

If your not sure of the resistor needed load equalizers can be had for like 5 bucks.
__________________
2007 AC F8 Tony Stewart
2004 Ford Excursion 6.0L 410 BHP
2000 Ski-doo Formula Deluxe 700
AvroAero is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Thread Tools


sponsors

Mustang Photos
Add to Favorites    Link to us    Contact    Directory    Site Rules    Archive    Terms of Use    Privacy    Top Sites    RSS    Meet Our Sponsors    Advertise   
AllFordMustangs is not affiliated with or endorsed by Ford Motor Company. ©Copyright 2002-2010 All Auto Enthusiasts Network

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110