Ok guys, I have read so many strings on here about gears that my head is buzzing. Great info but I need some input on my specific situation. I am considering going to a steeper gear. Here is my current set up.
07 convertible, 5 speed, stock 3.55's, eibach springs lowered 1.5", Saleen Stage 3 Supercharger running 9.5 PSI of boost, 20" rims w/P245/40zr20 tires. The entire wheel height is 27" when measured.
The big rims and tires (tall & heavy) are hurting me I know but I really like the look of them. So what gear. 3.90's, 4.10's? What am I gonna see, feel and get for my hard earned money? On the dyno I put down 429 RWHP and 406 FT/LBS of Torque as it sits.
Again, what are you running? Does anyone have a similar set up and if so, what was your experience?
It just all depends on what you are looking for. I am thinking you would be good in the 3.90's. Go to Richmond gear's website. They have a calculator that will tell you what rpm's you would be running at what speed. It should help you decide on what you want.
Ok guys, I have read so many strings on here about gears that my head is buzzing. Great info but I need some input on my specific situation. I am considering going to a steeper gear. Here is my current set up.
07 convertible, 5 speed, stock 3.55's, eibach springs lowered 1.5", Saleen Stage 3 Supercharger running 9.5 PSI of boost, 20" rims w/P245/40zr20 tires. The entire wheel height is 27" when measured.
The big rims and tires (tall & heavy) are hurting me I know but I really like the look of them. So what gear. 3.90's, 4.10's? What am I gonna see, feel and get for my hard earned money? On the dyno I put down 429 RWHP and 406 FT/LBS of Torque as it sits.
Again, what are you running? Does anyone have a similar set up and if so, what was your experience?
Thanks for the help.
You forgot to include the most important information:
What RPM’s do you want to be cruising down the freeway at and at what speed. Think about that hard, and go drive the car. Drive it for 2 miles at 3,000rpm…..it will most likely drive you crazy. If it does, you want to make sure you don’t get a gear that will put you in that range. I have mine set up to run at 2400rpm’s@80mph. I wouldn’t want to spin it any higher than that even if it costs me a bit of acceleration. But I have a screw blower like you so gearing the crap out of it is not necessary.
I'll bet you will want 3.73's to get a comfortable cruising RPM.
That would be about the same overall gearing I have and I have no issues with acceleration. I couldn't imagine wanting to gear my car shorter than it is. 1st gear is worthless, I just punch it and have to shift right away and 2nd gear will haze the tires even though I have some seriously sticky rubber. Shorter gearing wouldn't get me going any faster....faster. It could possibly even slow me down.
__________________
I get asked why I carry a gun. I tell them its because stabbing people is gross.
Best Gear Set up for my Car 
