Hey i was just wondering if any one had any ideas what i could do to my v6 2010 mustang? I mainly want to sitck with small Mods for now though because of warrenty, for example i already have a cold air intake from MMR and a Strut Tower Bar from Shelby but i want to do a little bit more, any body got any ideas?
ps. i know how to install most every thing on a car so give me some good ideas please!!!!!
if it's 5 spd get a Pro 5.0 shifter: work on the suspension, remember a better hook = faster, nice stereo or seat upgrades are good to have: tires/rims: body package, brake package...what kinda budget do you have?
__________________
"Goose, Hollywood's fine, I want Viper"
1995 Mustang GT Cnv 347(427 stroker being built!) almost done!
1996 Cobra with Kenne Bell 2.1 Supercharger and every other conceivable part you can bolt on it...650hp upgrade in the works
2003 Infiniti M45 V8 340 hp...a methadone treatment for reformed Mustang drivers
i got about 1500 bucks to slap down so i dont what to get i sorta want to go with performance parts now and later on down the road get some stuff for the interior and exterior cause that still looks good
Exhaust is your best bet man. It will help it flow a little better and you'll get a more aggressive sound out of it, closer to that of a GT. By the way man, it might be worth it to just go with appearance type of stuff. Without voiding the warranty theres not a whole lot of stuff you can do which is going to make it quicker. The exhaust is only going to bump it up maybe 10hp. I know Ford can install factory superchargers however that would be closer 5-6k.
i agree with the appearance addons , i started adding the chrome underhood accessaries to my 2010 V6 and it woke up the looks under the hood . alot of the 05-09 caps will fit for the 4.0, but the windshield wiper fluid cap will not fit . ditch the prop rod and get polished hood lift kit , has to be 2010 specific to work . there is alot out so far if you research what will work from the 05-09 's . only a few things i found so far will not .
__________________
Mustangs ! ..... made for speed but driven for pleasure
Glad I found this thread just getting started. I was hoping there might be some other V6'ers out there like myself
Im just getting started with my 2010 Mustang 2 days 100miles.
So far I have installed the locking lugs & gas locking clip.
Here are the part #'s thanks to others here on this forum.
Locking Lugs: F2LY-1A043-A
locking gas clip: 8U5Z-9C268-B
So you like that Cold Air Intake. Sure does look nice I was looking on the web at the:
MMR Stage 2 Cold Air Intake 2010 V6 with chrome throttle body pipe. I can afford to spend a little more on this Mod can anyone chime in save me some time looking? Looking for best quality, performance and chrome etc...
yea i reall like that mmr stage 2 intake very easy install i just had to buy a different rubber tube because the one that came with it was alittle to small but other than that it is great
Well I havnt decided yet on the CAI but you talked about the Strut Tower Brace. Still a newbie to all this never heard of any these parts so I googled them and found the Ford Racing Part its silver gray powder finish will match my paint job nicely.
SO Im going with the Ford Racing part here is the #.
I also found these 2010 Ford Mustang shock tower covers. The order process lets me pick them in the exact Ford color sterling gray. Also lets me pick V6 4.0 with Ford Racing Strut Tower Brace notches.
ya dude i would definitly get the strut tower brace it tightens up the front alot and gives a good styl under the hood i got mine off american muscle it has the shelby emblem on it i highly recomend that one if you get one especially since it bolts on to all 4 bolts on each tower much much more sturdy
ya dude i would definitly get the strut tower brace it tightens up the front alot and gives a good styl under the hood i got mine off american muscle it has the shelby emblem on it i highly recomend that one if you get one especially since it bolts on to all 4 bolts on each tower much much more sturdy
did you really feel a difference because in my car i felt absolutely nothing when i added my Steeda STB
2010 V6 Mustang Modifications 
Cold Air Intake 
:
