[jb15]

Anyone here taken one off? are they two sided taped besides the 4 nuts holding it on? just didn't want to pry to hard on it
Thanks,Jim

[Brain505]

Bolts and tape. Why you want to take it off? What you gonna do with the holes?

[Conejo172]

Originally Posted by Brain505

Bolts and tape. Why you want to take it off? What you gonna do with the holes?

What he said!

if you dont like it, you'd be better off swapping hoods with someone who does.

[jb15]

have a carbon fiber one to install

[jb15]

and a rear deck lid panel in fiber as well. thought they would look good on black and be a little different.

[2007MustangRed]

If your hood scoop is white or black ill buy it from you!


Sent from AutoGuide.com App

[jbt627]

I have a 2012 and I did remove mine last year with the intent to make it functional. In addition to the tape all the way around and the four studs with nuts, there are four push pins going through the hood. There are no access holes for the push pins and I doubt you could pull them out without damaging the scoop or hood paint. They are pretty heavy duty, much stiffer than the pins holding the underhood heat blanket, for example.

I actually drilled access holes on the underside of the hood and cut the pins off to get the scoop off. Doable, but a PITA. YMMV.