Discuss Intercooler routing pipes? on AllFordMustangs.com, the place for Mustang enthusiasts.
Welcome to AllFordMustangs.com. We look forward to you
registering on our forum and making your first post.
#1 permalink
Made Member
Joined: Jan 2008
Posts:
279
Threads:
43
clyde
Ohio
Intercooler routing pipes? i have been getting a lot of hints to run a intercooler on my car and i found a couple of kits on ebay. but i have not been able to see a good shot of how the pipe from the T/B gets the intercooler. some look like they go in to the fender and others go do along the abs pump but it dont look like it will fit. i know its a pain in the a$% but can someone with a 99-04 with a vortech or paxton with an intercooler show me a pic of the pipe location. or tell me were to run it.
__________________
4:10s,C/F dual friction 11in,B&M shifter,BBK headers,Flowtech xpipe, Super40Flows 3.5tips,17inCobraR's,75mm throttle body& TF plenum,A/M Boost&fuel pressure,Mechanical Oil&Water temp,Mach1 chin spoiler,Sequential taillights,Cobra bumper & emblems,Billet grill upper & lower,S/F connectors,BBK Springs,KYBstruts,C&C plates,Bumpsteer kit, FRPP center, 31 moser axles, Intercooled-Vortech V1,VMP 05' Blow through meter,Vortech maxflow BOV,Anderson powerpipe,Tuned by CRT performance, 410RWHP-425RWTQ.
#2 permalink
Made Member
4.6L Member
Joined: Sep 2002
Posts:
1,389
Threads:
65
LeRoy
New York
back in the day i ran a "s" and a "t" but with no intercooler, so i did a lil research for you and found this guys set up.
Custom Intercooler Install for Vortech - Ford Mustang | StangNet.com
im not to thrilled with how he cut his bumper support but at least it gives you a referance on how he routed his piping.
Personally id look for a bar type intercooler that has the inlet and the outlet both on the passanger side. that way it cuts down on your piping.
something like this:
http://www.roadraceengineering.com/p...c-sameside.jpg
j
__________________
2004 mustang gt
#3 permalink
Made Member
Joined: Jan 2008
Posts:
279
Threads:
43
clyde
Ohio
ok thanks for the info and doing some work i'll look in to buying one for a winter project
__________________
4:10s,C/F dual friction 11in,B&M shifter,BBK headers,Flowtech xpipe, Super40Flows 3.5tips,17inCobraR's,75mm throttle body& TF plenum,A/M Boost&fuel pressure,Mechanical Oil&Water temp,Mach1 chin spoiler,Sequential taillights,Cobra bumper & emblems,Billet grill upper & lower,S/F connectors,BBK Springs,KYBstruts,C&C plates,Bumpsteer kit, FRPP center, 31 moser axles, Intercooled-Vortech V1,VMP 05' Blow through meter,Vortech maxflow BOV,Anderson powerpipe,Tuned by CRT performance, 410RWHP-425RWTQ.
Intercooler routing pipes? 
