[payne24]

I have a 1996 Ford Mustang and the drivers side door is starting to drop and it appears that the pin & bushing needs to be replaced. Anyone have a clue on the best way to do this?

[heavy metal]

Welcome to the site!!!!With the door fully open,support it well(a jack under it,tie it up,etc..)Do one at a time.A good hammer and a good punch should drive the old ones out and install the new ones.Use a good quality grease when installing.

[payne24]

We will give it try. I will let you know how we make out. Thanks for the info!

[RandyStinchcomb]

I dont think you can buy a oin and bushing kit for the SN-95's...best bet is to replace the door hinge as an asbly.....