I was thinking about putting the Black Taillight Cover/Tint on my Stang. They have the covers on American Muscle for $54.99 that I dont like because you cant see the taillight outline like on this http://customerpics.americanmuscle.c...4812&sku=80107
The 2nd one is tint right? If so where can I order some because I bought some on ebay for like $20 and it sucked, it creased and bent really easy, didnt fit right. Any help would be appriciated, thanks guys
__________________
2003 Mustang GT Redfire 1/4 Mile - 13.408 @ 103.10mph | 60 Foot - 1.934 261rwhp & 284rwtq Tuned by Mike Dez @ Dez Racing
4.10's, SLP LM 1 Catback, Mac o/r Prochamber, K&N FIPK II CAI(painted red), MAC 70mm TB, C&L Plenum, Diablo Predator Tune, B&M Short Throw Shifter, Mach 1 Chin Spoiler, Mach 1 Grill Delete Next Mods - Saving for a Procharger :)
The best way to do it, and make it look the way you want, is to get them painted. I had mine tinted. They used 9 parts clear to 1 part black. After a few coats they look like your second pic. And they will never come off. I tried the Ebay overlays also and once they got dirt under them they started to fall off.
__________________
C&L 80mm mass air and True Flow pipe, Mac CAI, BBK 65mm tb, Steeda non-piggy back ud pulleys, MGW shifter, RAM HD clutch and aluminum flywheel, 3:73 gears, 2.5" Dynomax o/r x pipe, 3" MAC cat back system w/ 3 1/2" tips, Kenny Brown(front and rear strut tower brace, caster plates, subframe connectors,extreme matrix brace,jacking rails, torque brace, lowering springs), Bilstein shocks, 03-04 Cobra(side scoops, rear bumper cover, top), 6pt roll cage, white FR500's, FMS 2000 Cobra R air dam.
Idk, about painting them. I mean I wouldnt mind doing that, but Id much rather just have the overlay/tint on them. Is there a site that sells good ones?
__________________
2003 Mustang GT Redfire 1/4 Mile - 13.408 @ 103.10mph | 60 Foot - 1.934 261rwhp & 284rwtq Tuned by Mike Dez @ Dez Racing
4.10's, SLP LM 1 Catback, Mac o/r Prochamber, K&N FIPK II CAI(painted red), MAC 70mm TB, C&L Plenum, Diablo Predator Tune, B&M Short Throw Shifter, Mach 1 Chin Spoiler, Mach 1 Grill Delete Next Mods - Saving for a Procharger :)
yea if you wanted the best just take them and get them professionally tinted then they tint on how dark or light you want or even how shiny you want..but yea that $20 crap on ebay sucks
For the best look though take them to a bodyshop and get them tinted like I mentioned. Then it's show quality and much sturdier. I just bought another set of 99 Cobra tail lights incase I ever want to change back. Be thankfull you don't have the little amber lens that makes a set of tail lights cost $350+.
__________________
C&L 80mm mass air and True Flow pipe, Mac CAI, BBK 65mm tb, Steeda non-piggy back ud pulleys, MGW shifter, RAM HD clutch and aluminum flywheel, 3:73 gears, 2.5" Dynomax o/r x pipe, 3" MAC cat back system w/ 3 1/2" tips, Kenny Brown(front and rear strut tower brace, caster plates, subframe connectors,extreme matrix brace,jacking rails, torque brace, lowering springs), Bilstein shocks, 03-04 Cobra(side scoops, rear bumper cover, top), 6pt roll cage, white FR500's, FMS 2000 Cobra R air dam.
Taillight Cover Question 
