[ray_96gt]

ok i've got a set of 4v mach1 heads that has some damage to one of the cam towers, if anyone knows a good place where i can get them repaired,preferably around alabama or florida,it would be much appreciated

[beetlejuice]

Find a good local machine shop in the yellow pages. They should be able to weld and/or repair most head damage.

[hitman_187]

Hey guys I'm new at this so sorry if i'm stepping on anybodies toes but, I have an 04 GT and it has an aftermarket faceplate on the speedometer and it is 20 mph's too fast so it show 70 when i'm going 50 i bought the car like that for a great deal any suggestions on how to fix thnx guys

[ray_96gt]

ha, i was looking for somewhere a little more specific than the yellow pages , some where with a good rep. but i guess thats a good place to start, thanks

[ray_96gt]

do you have stock gears? changing the gears without changing out the speedo gear will throw of your speedometer

[hitman_187]

Naw i don't know if they're changed but i'll find out thanx do u think changing the speedo gears is a do it yourself job or a shop??

[ray_96gt]

its fairly easy if that indeed is your problem heres a link that will tell you which speedo gear you'll need and how to do the install Speedometer Gears

[hitman_187]

hey thanks a lot budd i'll definetly check it out

[racin366]

ray, for a good shop, you may try steeda, they have a shop in south georgia, valdosta I think. Other than that I know there are some good places for that in jax and tampa, but most of the ones I know of are further south.

[ray_96gt]

hey thanks, i'll have to give them a shout!