Well all the work was done on my car a few years back and is all Kenny Brown. Too bad you can't get it anymore, it was siad to be some of the best stuff on the market. I have Kenny Brown: subframes, extreme matrix brace, jacking rails, front and rear strut tower braces, caster plates, aluminum IRS bushings, differential brace, springs(1 1/4" front, and 1 1/2" rear). I also have Bilstein shocks, Steeda bumpsteer kit, 6 point rollcage, and some fat a$$ wide tires and rims. My car is set up for street/road racing. It's very streetable but has seen many SCCA track days. It's super fun to drive. Oh, also you'll need sticky tires. My tread rating is 100.
__________________ C&L 80mm mass air and True Flow pipe, Mac CAI, BBK 65mm tb, Steeda non-piggy back ud pulleys, MGW shifter, RAM HD clutch and aluminum flywheel, 3:73 gears, 2.5" Dynomax o/r x pipe, 3" MAC cat back system w/ 3 1/2" tips, Kenny Brown(front and rear strut tower brace, caster plates, subframe connectors,extreme matrix brace,jacking rails, torque brace, lowering springs), Bilstein shocks, 03-04 Cobra(side scoops, rear bumper cover, top), 6pt roll cage, white FR500's, FMS 2000 Cobra R air dam. | 
1999-04 roading racing mustang 
