[whitesnake97PA]

Tried researching, but don't really see any numbers for a similar setup.

I just bought a RAM HDX clutch/RAM Billet flywheel (8-bolt) and FRPP driveshaft. Any idea what the difference will be in total weight (rotating mass) and/or revving capabilities?


Coupled with 4.10's on a 97 Cobra.

Thanks for the inputs!

[hotshot]

don't over-rev your motor is my first suggestion. after you hit peak torque at w/e it is for the new edges, don't exceed it or you'll do some serious damage. and weight... probably around 30lbs give or take

[whitesnake97PA]

in terms of revving, i meant response, not max RPM, but that is good advice. The Cobra stock redlines at 6800 and fuel shut off is at 7k. if i get a good tune though, i think that will cure that and free it up, but i plan on getting one or two more bolt-ons before i get the tune. Thanks for the numbers. thinking she will be rather potent compared to what she is!