[East Bay HC]

anybody know how to do this? driver side was easy but im stumped on the passenger side. thanks!

[chuck943]

I'll try and explain it to you as best I can,hope this helps.

Open the glove compartment, push in on the tabs and open the glove compartment door to its fullest extent.
Remove the right hand A/C register duct.
Remove the two screws retaining the duct to the A/C register.
Separate the A/C duct at the air plenum and remove the duct.
Disconnect the air bag electrical connector.
Look up thru the glove box opening and u should see 2 bolts at the base holding the air bag and remove them.
Remove the air bag electrical connector from the instrument panel bracket.
Placing one hand in the glove compartment opening, push the passenger air bag module out and remove it.

[East Bay HC]

thank you! got it out with no trouble!

[racin366]

More out of curiosity than anything, is installing a new one the opposite of removal? Messing with the air bags is one of the few things I've never done, I know if you make a mistake it can be disastrous.