It depends, you should see if the tensioners show signs of wear, I pulled the timing cover off an 03GT yesterday to put some Comp Cams in and they were worn almost through the plastic to bare metal!
For what it's worth when my motor was rebuilt at 59K I used the stock chains, they looked perfect!
__________________ 99 SVT Cobra-Stock Teksid Block .020 over,Balanced Rotating Assembly,Manley Forged Pistons & H Beam Rods,Forged Cobra Crank,Stock HCI,Total Seal Plasma Moly Rings,Federal Mogul Bearings,ARP Studs,Melling Billet Oil Pump,Mac O/R H & Durablack 2.5 Catback,JLT RAI,Vogtland 1.6 Springs,Maximum Motorsports CC Plates,Subframes,Steeda Tri-Ax,Nitto 555's,U7146 Predator,Custom Diablo Tune,Member 7 Quart Club! 314HP/307Torq
Next:Polished Vortech V-2,60's,Aviator Pump& BAP,Billetflow IRS Brace & 500HP |