[Mr Ron B]

if so what will i need i have a 01 gt auto with chip 4.10 gear steeda pulleys accufab plenum and TB, mac h-pipe 2chamber flowmaster and a mac cai kit is it a good thing to do ?

[Darkness 96 GT]

It will not fit because the intake ports are different so,it's a no go.
I would get a twin screw supercharger instead because it is better
and makes less heat than a roots type superchager.The Kenebell
twin screw superchager makes more power than the Eaton roots
type superchager and is good quality also.They can be had at
www.seanhylandmotorsports.com

[Steeda00GT]

agree with darkness their pal. and for a tip get rid of the steeda harmonic balancer, they tend to cause oil pump sickness which will shatter your oil pump gears then no oil pressure = you know what. just a suggestion.
but definately look into the kenne bell especially if your looking for better performance, in all honesty it will be alot cheaper then swapping everything from a 4 valve to your 2v. good luck