Confuse over to ColdAir Intake kit

stang35th · 04-24-2006

Hi,

I wonder if I should by the UPR Big Mouth Filter part # 5022-96-GT (http://www.uprproducts.com/shopping/shopexd.asp?id=452) 3.5 inch (88 mm)

or

the BBK 1718 (http://www.bbkperformance.com/products/induction.shtml) 3 inch (76 mm)

Let me know what you think

Thanks

So Money · 04-25-2006

Neither one. They both are metal, so technically the both suck, Metal will be hotter under the hood than plastic and this summer is going to be a hot one. Go with a composite plastic cai. There have been some good threads written regarding CAI on this forum do a search and look around.:thumbsup

Langod · 04-25-2006

You're talking tiny horsepower differences between the best and worst CAIs out there. Get the one you like the looks of, because it will make almost no difference at the dyno/track.

TK421DS · 04-25-2006

Quote:

Originally Posted by Langod

You're talking tiny horsepower differences between the best and worst CAIs out there. Get the one you like the looks of, because it will make almost no difference at the dyno/track.

With that said.get the K&N filter charger kit and save 200$ and get some gears or something...........

All you need is to ditch the Air box and put an open filter on there...........75$

BlueStreak03 · 04-25-2006

or you could get a JLT. www.jlttruecoldair.com

stang35th · 04-27-2006

Thanks for you inputs

VP_96COBRA · 04-27-2006

is jlt metal or plastic or paper or glass or cement?

So Money · 04-28-2006

I believe JLT is porcelain!

VP_96COBRA · 04-28-2006

is the jlt plastic?

So Money · 04-28-2006

its looks like it composite plastic, pretty sure it is not metal.

VP_96COBRA · 04-28-2006

so thats the ojne u suggest over the wmsracing one right cause its plastic? i just liked the 95mm maf on the wms racing one..

So Money · 04-28-2006

No I recommned the demolet tunable induction CAI. www.demolet.com i Havent used the jlt.

SMOKE · 04-28-2006

Quote:

Originally Posted by So Money

No I recommned the demolet tunable induction CAI. www.demolet.com i Havent used the jlt.

+1 on the recomendation.

VP_96COBRA · 04-28-2006

we have a problem tho... see Fender to throttle body system (100mm pipe all the way) Does Not fit properly with strut tower brace.... and i have a strut tower brace... so next recommendation? besides taking the brace off

jjgt06 · 04-30-2006

hay get a granitelli cold air kit from summit,, 25 hp to the rear wheels!!! not the wimmy 7-10 hp from k&n