[black out]

Ok im looking to put a small shot of nitrous on my 98 gt and im fixing to do the PI head and intake swap and i was looking at this kit from Mustang Tuning.com and was woundering if theres anything else i need and if so what??? (sorry dont know jack crap about nitrous)

http://www.americanmuscle.com/vev5renikit.html

[the98stang]

Originally Posted by black out

Ok im looking to put a small shot of nitrous on my 98 gt and im fixing to do the PI head and intake swap and i was looking at this kit from Mustang Tuning.com and was woundering if theres anything else i need and if so what??? (sorry dont know jack crap about nitrous)

http://www.americanmuscle.com/vev5renikit.html

First off, that bottle size is a JOKE. Your going to want a 10lb bottle at the minimum, because even with a 10lb bottle you MIGHT get 10-12 runs in with a 100 shot.

I would recommed NX simply because there HP ratings are rated to the wheels. If you want nitrous on your car, your going to need tons of information, and your going to have to research. If you don't know what your getting into, your going to blow your engine.

Before you even THINK about spraying, get a compression test done to make sure your holding efficient pressure in each cylinder. Also get an aftermarket oil pressure gauge to monitor your pressure.

If all that checks out, and you've read about nitrous for days and days, THEN you are ready to start buying parts.

[So Money]

I recently started asking questions about n20 kits on a different thread - there is a lot of stuff you have to do in order not to destroy your manifold or engine - go back later in this forum and look up the thread called n20 questions