[mooseincasevill]

i have a 2002 ford mustang 4.6 my the car has been acting up ever since it got a tune up and now i got these codes p1aee, p0008

[chuck943]

I am assuming you mean P1000 which means that you have not completed the monitors yet which would be set if you tried to clear codes, and the second code I am assuming it was P0308 which is a miss fire on no. 8 cylinder.

[mooseincasevill]

i got these codes of my hypertech power programmer

[chuck943]

Neither of the codes you listed are valid codes in the ford shop manual so I am assuming that they are P1000 and P0308,those would be the most common codes that would set. Does your literature with the programer list anything for the codes you are getting?

[mooseincasevill]

i used my dig cluster trying to pull codes and i got these 262, 147, and 5284 i called hyper tech and they told me their scanner pulled a false code and the other code is possiblely a 02sensor anyone got any idea's

[chuck943]

None of these codes you are listing are valid codes.Can u get someone to retrieve the codes with a scan tool?

[boogman]

Hey moose,

Had the same code on my 2002 gt had to send scanner back to hypertech to be reprogrammed, they had some leave the factory with the wrong programming info. They sent me a phone number and a point of contact, I called they gave me the info I needed to send it to them. Had it back in a week, have to put stock program back then send it to them. they will want the serial number from your programmer and where you bought it. Hope this helps you.

Rod