you mean what am I trying to repair. I already pulled out my lock cylinder. I am talking about the plastic piece that pushes and pulls the pin that switches the ignition switch into acc, on, run, and start. Mine is broken because when i try to start my stang with the key it starts but I cannot shut it off with the key. I have already verified that the problem is NOT the ignition switch itself, the switch works fine outside of its mounted position.
I NEED info in how to remove the plastic piece because this stang is my daily driver and I am stuck driving my 1980 toyota pickup that right now gets worse mileage than my stang
remember from my knowledge it goes like this:
key:lock cylinder: plastic gear : plastic ignition lock actuator(broken):ignition switch
thank you for taking the time to reply to my post and I hope I explained everything clearly enough please let me know if you need more info.