Ford Mustang Forum banner

Output Tailshaft question

506 views 2 replies 3 participants last post by  lwarrior1016 
#1 ·
Hey guys, I have a 1999 Mustang GT with the auto transmission, I had replaced today the output tailshaft seal as it was leaking but the driveshaft still has play in it either up / down / left / right while in tailshaft. I have done some searches but I cannot seem to track down a part number to see if there is a bushing that I can replace.

Could I get a part number or part name to order?


Thanks a ton in advance guys.
 
#3 ·
There most certainly is a bushing in the housing. Typically if its bad it will leak. I take it that since you replaced the seal that the tail shaft is leaking. I would take the rear housing off and either replace the bushing or take it to a transmission shop and have them do it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top