[silvers]

Can I use the alternator and power steering bracket off my v6 or do I have to find some off of the 302? Anyone know where? If I bought them off ebay it would be over 150 bucks and thats insane! Can I order the alternator bracket off summit for twent bucks? Or just go with the stock? I will have to buy a crank shaft pulley off of a 302, Correct? and Do I need the belt tensioner off the 302?

[RLG34750]

ok i am a problem understanding what are try to the

brackets from a v6 to a 302 or v6 to 351 (thread title)

or is a 302 bracket set you want to install on a 351 .....

need a little more clarification on what you are trying to do.....

[dufkis]

You will need brackets for a 351, stock or not stock.

[silvers]

I have a v6 and all the brackets. Now clarify me this... If I was to buy a 302 alternator bracket, 302 crankshaft pulley, spacer for crank shaft and the swap bracket for the power steering. Would I be set to go on the belt set up? Or do I need the belt tensioner? I'm trying to get this to work on my 351w. If someone would give me there number I would be glad to call and ask questions.

[EagleAutosports]

You need 351 brackets. Period. The 351 is taller and in terms of the brackets, it's also wider than a 302. Because of the higher deck height, that spreads the bracket mounting holes further apart.

[RLG34750]

now that we have that cleared up nothing from your v6 will interchange on the 351.....

[silvers]

So if I get the 351w alternator bracket, and use the v6 alternator cause its serpentine. I could buy the swap bracket for the power steering. Get the 302 crank pulley and use the spacer with the 302 water pump and all my pulleys will line up with the belt?