[RLG34750]

Originally Posted by noble steed

Have you ever driven your racecar to the supermarket? Slap some tags on that thing and turn it into the drag car/grocery getter! HAHA

Like i tell the wife it's not a race car....

Just because it runs low 10's .....

it has tags & insurance

full interior ,A/C & power steering

yes i have driven it to the supermarket

i love setting off other people's alarms....

[Töddlich]

Originally Posted by rlg34750

i love setting off other people's alarms....

haha love doing it to all my coworkers as i leave,especially when i had my 400 smallblock gmc and 2 chamber flowmasters! use to piss em off to no end

[noble steed]

Here is a pic of a little bit of the silver color wiring loom I am putting in. I don't think I'm going to use much more of the silver, and I have most of the wiring condensed to one spot on both sides. It's starting to look a lot cleaner, a few of the wires I lengthened and ran under the frame rail out of view. This is a work-in-progress pic, it's not finished by a long shot.

[RLG34750]

Originally Posted by noble steed

Here is a pic of a little bit of the silver color wiring loom I am putting in. I don't think I'm going to use much more of the silver, and I have most of the wiring condensed to one spot on both sides. It's starting to look a lot cleaner, a few of the wires I lengthened and ran under the frame rail out of view. This is a work-in-progress pic, it's not finished by a long shot.

Now dat what i'm talkin' bout....

[noble steed]

Originally Posted by rlg34750

Now dat what i'm talkin' bout....

There is that Flo-Rida accent comin through. Yes Sir.

Well, cam will be here Thursday or Friday at about 5:30-6 o'clock. Monday it's going to the machine shop to make sure it fits and all that jazz. Tuesday I will order the springs and rods. Then next Tuesday I'll get the rockers. I think I'm going to use the Crane Energizer 1.6's. Then after I get all the valvetrain stuff in, Ill see about getting the shop paid off and get my motor back. Then the week after that, I'll have them get me that new head and fix the old one, too. Then maybe I can order then darn bearings and start getting it short blocked and up on the stand.

[RLG34750]

Sounds like a plan....

[302Feen]

See, I knew you'd start cleaning out that engine bay. All those wires and hoses just look so hideous you can't let them be!

It's looking really good. The last pic was kinda hard to see though...

[noble steed]

Originally Posted by 302Feen

See, I knew you'd start cleaning out that engine bay. All those wires and hoses just look so hideous you can't let them be!

It's looking really good. The last pic was kinda hard to see though...

Yeah, I'm sorry for the crappy pictures. All I have to take pictures with is a cell phone with no zoom or anything like that. I am getting a digital camera here soon, so that way i can get video and pictures of it and all that good stuff.

[noble steed]

I have got my headers painted. Took my little Dremel tool and used a miniature wire brush on it and got down in all the little cracks and crevasses. Look good? I used 2000 degree header paint with Ceramic.

[RLG34750]

Originally Posted by noble steed

I have got my headers painted. Took my little Dremel tool and used a miniature wire brush on it and got down in all the little cracks and crevasses. Look good? I used 2000 degree header paint with Ceramic.

it looks good .....

i just hope it holds up.....

you know what really looks......

a freshly painted rear housing......

i was giving ideas since we know much you are enjoying do this....

you know i'm always looking out for you.....

[noble steed]

What rear housing are we talking about? I also just now got a shipment in from UPS. My Trick Flow Stage 1 cam. I never knew that Trick Flow cams were built by Crane Cams...It's got the Trick Flow part number engraved on the end of it and on the spec sheet it says Trick Flow by Crane Cams... HHMMM cool.

The more ideas you guys give me the better off I will be.

[RLG34750]

Originally Posted by noble steed

What rear housing are we talking about? I also just now got a shipment in from UPS. My Trick Flow Stage 1 cam. I never knew that Trick Flow cams were built by Crane Cams...It's got the Trick Flow part number engraved on the end of it and on the spec sheet it says Trick Flow by Crane Cams... HHMMM cool.

The more ideas you guys give me the better off I will be.

The whole axle housing .......

paint it from drum to drum.....

crane use to make cams for a lot of people

including the (yuk) alphabet cams

[noble steed]

AHH... I painted the rear end when I did the suspension upgrades. I didn't post anything up about that stuff... It's got the KYB and Steeda lowering and handling package on it with some stronger sway bars.

It's a little dusty right now, but it's nice and shiny when it gets cleaned up. Ill get more pics of all that stuff tomorrow, it's freezing right now!

[RLG34750]

Originally Posted by noble steed

AHH... I painted the rear end when I did the suspension upgrades. I didn't post anything up about that stuff... It's got the KYB and Steeda lowering and handling package on it with some stronger sway bars.

It's a little dusty right now, but it's nice and shiny when it gets cleaned up. Ill get more pics of all that stuff tomorrow, it's freezing right now!

ok i will try to think of other things for you to do....

i understand about the weather too....

its cooled off here too....

It's down to 76* now

BURRRRRRRRRRRRRRRRRRRRRRRR........

[noble steed]

Oh very funny man...verryyy fuunnnnnyyyy. It was 87 degrees all of last week, now they are calling for 7-12 inches of snow. WOW.. Want to come to Missouri for a little while? If you don't like the weather, stay another hour it will change again.