Attn: Fox Body owners! Opinion on headlight styles appreciated.
Hi everyone. I wanted to change the look of my old headlights to something different. Any suggestions via pictures or website links appreciated!! I have a 91 Mustang GT Convertible. Alot more changes/upgrades comming soon, but first things first....
i like the stock headlight setup, if i were going to get a new set i would get the crystal lens which is more see through i think i looks better, i would leave the amber lights because your car is red i think i flows but i do not like the 1 piece headlights i think they look horrible
__________________
1989 Ford Mustang LX Notchback,5.0L 5 speed
331 Stroker wuth forged eagle rotater, Scorpion roller rockers, mahle forged pistons, AFR185s,Spec Stage 2+ Clutch,Steeda Sub Frame Connectors with Seat supports,Hurst Short Throw Shifter, Mr. Gasket Hi0-Flo 180* T-Stat,Lunati VooDoo Series cam,Trickflow upper and lower intake,BBK CAI,BBK Long Tube Headers,BBK Off-Road H-Pipe,Flowmaster 40 Series Mufflers,Aluminum Driveshaft,17" Cobra R's,10000K HID's One problem after the next !!
1988 Mustang GT, TTops, 306, AOD with 4r70w gearset and shiftkit, E303 Cam, Ford Racing headers, BBK H-pipe, Flowmaster Cat Back, 3.73's, Traction lok with F150 spring, Eibach lowering kit, B&M Tork Master 2400 Converter, trans cooler, C&L 76mm Mass Air, Accufab 70mm throttle body, K&N filter, Mass Air conversion, Subframe connectors, Lots of Polyurethane, 210HP at 4500rpm, 272 Torque at 3600rpm at the wheels, best 1/4 mile: 14.12
Follow these directions, it wasn't hard to do, just follow the steps, and not very expensive, you can then turn the foglight on and off when you have the parking lights on
1988 Mustang GT, TTops, 306, AOD with 4r70w gearset and shiftkit, E303 Cam, Ford Racing headers, BBK H-pipe, Flowmaster Cat Back, 3.73's, Traction lok with F150 spring, Eibach lowering kit, B&M Tork Master 2400 Converter, trans cooler, C&L 76mm Mass Air, Accufab 70mm throttle body, K&N filter, Mass Air conversion, Subframe connectors, Lots of Polyurethane, 210HP at 4500rpm, 272 Torque at 3600rpm at the wheels, best 1/4 mile: 14.12
Those lights are the same I have, it must be the black that makes them pop on his.
I've always liked the foglight/parking light combo, I had that before but the circuit developed a problem so I put it back to stock. I'll have to do that mod again myself.
__________________
MOOG Certified Tech. For mods and sound clips, see profile and gallery.
Ask me why I ran "only" a 13.54.
Member: NMRA Member: White Mustang Registry #362 Member: Fuzzy Dicer
however, these are my favorite aftermarket headlights. with all the diamond cut/LED/HID/projector setups for the fox, im suprised nobody has come out with replacement taillights with diamond cut lens(i wish they would at least make an LX set).
Attn: Fox Body owners! Opinion on headlight styles appreciated. 
