AFM Web

Go Back   Ford Mustang Forums > Mustang Forums > 5.0 Mustang > 5.0L Talk
Welcome to AllFordMustangs.com. We look forward to you registering on our forum and making your first post.
Introductions | Mustang Lounge | 5.0 Talk | 5.0 Tech | 94-95 Tech | Mustang Tech | Racing | Regional

Reply
 
Old 06-05-2009   #1 (permalink)
asc87#117 is offline Rookie


Joined: Apr 2008
Posts: 8 Threads: 2
 asc87#117's Country Flag
MA   Massachusetts
Default running a cold 5.0

when i start my car in the morning, it shuts off. i think there is too much fuel going into the car when its cold. i have to play with the gas petal to keep it running for a minute or two. after a while it will idle as it get warmer. when the car is in ambient temperature mode (normal running) the car idles MINT. aka 750 rpms....
any idea?? the vacumm is closer to zero before settling around 11...

the car was dynoed and shows 479 @ RWL's

1. 5.0 with trick flow intake and heads
2. 48# red line inj.
3 custom ground cam
4. two fuel pumps
5 vortech s-trim max boost 11lbs. **no A/A cooler**
6. full length header with 2.5 exhaust
7. griffin 3-core radiator
8. msd boost retard timing set
9. a really big smile on my face. :-)
asc87#117 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-05-2009   #2 (permalink)
89blackstang304 is offline Apprentice


Joined: Apr 2009
Posts: 60 Threads: 9
 89blackstang304's Country Flag
Watertown   Connecticut
Default

Your car is highly modified. You will will have to sacrifice some drivability. I fixed mine by tuning the MAF transfer function with binary editor. It is probably running very rich @ idle when you first start it. The computer goes into closed loop after a minute or so. Does it surge before it dies or or does it just die after you start it?
__________________
89 GT, Stock block bored 304, ported/polished windsor heads w/ oversized valves, 1.7 rockers, Comp XE270HR-12, 30lb inj,Trick Flow Track Heat Upper/lower, 75mm Mass Air, 70mm TB/EGR, fenderwell intake, 3.73's, alum drivshaft, subframe connectors, control arms, Headman shorties, flowmasters, Moates quarterhorse/LC-1 wideband/Binary Editor/EEC tuner, everything stripped that doesnt make it go fast

280 hp @5520
309 tq @4504
89blackstang304 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-29-2009   #3 (permalink)
asc87#117 is offline Rookie


Joined: Apr 2008
Posts: 8 Threads: 2
 asc87#117's Country Flag
MA   Massachusetts
Default cold running

yes it surges right before it crashes. and the smell of gasoline is very rich coming out of the back.
asc87#117 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-29-2009   #4 (permalink)
EagleAutosports is offline Forums Moderator

4.6L Member
5.0L Member


Joined: Feb 2007
Posts: 34,753 Threads: 148
 EagleAutosports's Country Flag  View EagleAutosports's 546 photos  View EagleAutosports's 3 classified ads  View EagleAutosports's 1 products for your review  View EagleAutosports's HomePage
Graham   North Carolina
Send a message via MSN to EagleAutosports Send a message via Yahoo to EagleAutosports
Default

The more modified it gets the more the stock computer gets less efficient and gets to the point of needing some assistance from a custom chip. Plus some cars are just plain cold natured and nothing you can do to make it idle like a stocker once you get so modified.
__________________
MOOG Certified Tech.
For mods and sound clips, see profile and gallery.

Ask me why I ran "only" a 13.54.

Member: NMRA
Member:
White Mustang Registry #362
Member: Fuzzy Dicer
EagleAutosports is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heater stays cold American Dream 2005+ Mustang GT Tech 8 12-18-2006 12:08 AM
engine running code reader 89notch 5.0L Tech 6 08-09-2006 12:57 PM
Running crappy cold 6spdracerx 94-95 Tech 2 12-11-2005 03:32 PM
Help rough running 5.0 RPM289 5.0L Tech 7 06-30-2003 11:16 AM
Where I can get a Cold Air Induction kit for a 91 2.3L, or if a 5.0 kit will work? stang2_3 Mustang Lounge 4 08-29-2002 09:28 AM

sponsors

Mustang Photos
Add to Favorites    Link to us    Contact    Directory    Site Rules    Archive    Terms of Use    Privacy    Top Sites    RSS    Meet Our Sponsors    Advertise   
AllFordMustangs is not affiliated with or endorsed by Ford Motor Company. ©Copyright 2002-2010 All Auto Enthusiasts Network

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110