Hey guys what is the size of the stock 5.0 throttle body?? Also coolant flows thro the t/b and egr plate, do i just clamp off the hoses and then take it off??
__________________
Ýøüñg~Mèchãniç™
91 Mustang GT: BBK Cold Air Intake, BBK Ceramic Coated Shorty Headers, BBK Off Road H-Pipe, Flowmaster Cat-back, Msd Blaster Coil, Msd Dist. cap, Msd Wires, Pro 5.0 Shifter, A/C and Smog Delete, Steeda Adjustable Clutch cable, quadrant and firewall adjuster, summit rotors.
I don't know about the whole coolant in the TB thing... I don't remember that when I was changing my intake, but mine is a '94.
Someone will be able to help you though.
__________________
-1994 Mustang GT... K&N filter,GT40 tubular intake,BBK Full Length Headers,modified midpipe & Flowmaster muffs, timing at 12*. Best time- 14.74 @ 93.16 -Check profile for pics of our car collection! -Member of MBMCustoms Car Club - AmericanMuscle ROCKS!! - "Save a horse, drive a Mustang!"
The throttle body is 59-60mm. The older throttle bodies were even smaller. The 65mm is good for a stock or near stock engine.
As for the coolant lines, you can actually leave the ports open, it won't hurt. The lines can be capped off or removed all the way to the hard line and capped to clean up under the hood. A hose with a bolt in it sticking up from the intake is ugly.
__________________
MOOG Certified Tech. For mods and sound clips, see profile and gallery.
Ask me why I ran "only" a 13.54.
Member: NMRA Member: White Mustang Registry #362 Member: Fuzzy Dicer
Throttle body size and question.. 
