#1 permalink
Made Member
2.3L Member
Joined: Jul 2008
Posts:
1,085
Threads:
154
N/A
Montana
EGR Block Off Plate Hey guys I was looking at the egr and noticed that there isnt a pipe goin into it from the exhaust, it is just wires.. is that right or am i wrong?
__________________
Ýøüñg~Mèchãniç™ 91 Mustang GT: BBK Cold Air Intake, BBK Ceramic Coated Shorty Headers, BBK Off Road H-Pipe, Flowmaster Cat-back, Msd Blaster Coil, Msd Dist. cap, Msd Wires, Pro 5.0 Shifter, A/C and Smog Delete, Steeda Adjustable Clutch cable, quadrant and firewall adjuster, summit rotors.
#2 permalink
Made Member
5.0L Member
Joined: Feb 2007
Posts:
824
Threads:
48
Birmingham
Alabama
yes you can just make one.
__________________
1987 t-top gt
#3 permalink
Made Member
2.3L Member
Joined: Jul 2008
Posts:
1,085
Threads:
154
N/A
Montana
and that is all i need to do is make the block off plate.. leave the egr plugged in and everything??
__________________
Ýøüñg~Mèchãniç™ 91 Mustang GT: BBK Cold Air Intake, BBK Ceramic Coated Shorty Headers, BBK Off Road H-Pipe, Flowmaster Cat-back, Msd Blaster Coil, Msd Dist. cap, Msd Wires, Pro 5.0 Shifter, A/C and Smog Delete, Steeda Adjustable Clutch cable, quadrant and firewall adjuster, summit rotors.
#4 permalink
Made Member
5.0L Member
Joined: Feb 2007
Posts:
824
Threads:
48
Birmingham
Alabama
i think its unplugged.
__________________
1987 t-top gt
#5 permalink
Made Member
2.3L Member
Joined: Jul 2008
Posts:
1,085
Threads:
154
N/A
Montana
alright ill just have to try it and see what happens..
__________________
Ýøüñg~Mèchãniç™ 91 Mustang GT: BBK Cold Air Intake, BBK Ceramic Coated Shorty Headers, BBK Off Road H-Pipe, Flowmaster Cat-back, Msd Blaster Coil, Msd Dist. cap, Msd Wires, Pro 5.0 Shifter, A/C and Smog Delete, Steeda Adjustable Clutch cable, quadrant and firewall adjuster, summit rotors.
#6 permalink
Senior Member
Joined: Nov 2008
Posts:
2,677
Threads:
2
cartersville
Georgia
The EGR on Fox bodies are internal. It runs through the upper and lower intake, then into the EGR spacer. I'm pretty sure it will throw a CEL, but once the ECM recognizes that the EGR valve is not opening or closing, it automatically deletes its function. Meaning the ECM will not cycle the EGR valve. A block off plate is fine. Or you could block it off between the head and intake gasket surface, or between the upper and lower intake.
__________________
89 Coupe
EGR Block Off Plate 
