I just got my first Mustang. It's a 1989, with the 5.0L 302, and a Automatic Transmission. However the shift linkage has been disconnected and I can't seem to route it properly. Are there any sites or does anyone have a routing diagram for this Automatic Transmission shift cable. Shifter is floor mounted. Any help would be greatly apreaited.
I believe the linkage from the shifter goes from the shifter toward the back of the car then turns back up to the side of the transmission, there should be something on the bottom of the car that holds it in place
__________________
1988 Mustang GT, TTops, 306, AOD with 4r70w gearset and shiftkit, E303 Cam, Ford Racing headers, BBK H-pipe, Flowmaster Cat Back, 3.73's, Traction lok with F150 spring, Eibach lowering kit, B&M Tork Master 2400 Converter, trans cooler, C&L 76mm Mass Air, Accufab 70mm throttle body, K&N filter, Mass Air conversion, Subframe connectors, Lots of Polyurethane, 210HP at 4500rpm, 272 Torque at 3600rpm at the wheels, best 1/4 mile: 14.12
The cable attaches to the bottom of the shifter, then goes towards the back of the car. It'll bend around back towards the front and then uses a grommet to attach to the linkage.
Is that what you need, or do you need to know how the linkage is arranged?
__________________
MOOG Certified Tech. For mods and sound clips, see profile and gallery.
Ask me why I ran "only" a 13.54.
Member: NMRA Member: White Mustang Registry #362 Member: Fuzzy Dicer
1989 Mustang Transmission Trouble. 
