07-10-2009
|
#16 (permalink)
| | |
Quote:
Originally Posted by noble steed  Do what about torque boxes???? Explain.... |
I betting money they are ripped ,torn or cracked....
the repair is to reinforce and weld them back & better.....
__________________ Reggie Real Racers Don't Street Race PERIOD....... '88 LX Hatch With A Little Of This & A Little Of That...... 10.39 @128 MPH Soon to be faster.... | 
|  | |
07-10-2009
|
#17 (permalink)
| | |
they are not ripped im just reinforcing them
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | |
07-10-2009
|
#18 (permalink)
| | |
Quote:
Originally Posted by fs308 they are not ripped im just reinforcing them |
An ounce of prvention is worth a pound of cure.... 
__________________ Reggie Real Racers Don't Street Race PERIOD....... '88 LX Hatch With A Little Of This & A Little Of That...... 10.39 @128 MPH Soon to be faster.... | |
| | |
07-11-2009
|
#19 (permalink)
| | |
if you notice im building everything under the car before i even start with the motor or transmission
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | |
07-11-2009
|
#20 (permalink)
| | |
Quote:
Originally Posted by fs308 if you notice im building everything under the car before i even start with the motor or transmission | You are building the way i do ......
From the ground up.......
__________________ Reggie Real Racers Don't Street Race PERIOD....... '88 LX Hatch With A Little Of This & A Little Of That...... 10.39 @128 MPH Soon to be faster.... | |
| | |
07-11-2009
|
#21 (permalink)
| | |
its not a cheap way of doing things. you dont want to know what i have in my suspension so far and i still have close to 1500 left for suspension 
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | |
07-11-2009
|
#22 (permalink)
| | |
Quote:
Originally Posted by fs308 its not a cheap way of doing things. you dont want to know what i have in my suspension so far and i still have close to 1500 left for suspension | I have a very good idea what you have in suspension....
because i know what i have in mine.....
but when you do it right there first time you only have to do it once......
__________________ Reggie Real Racers Don't Street Race PERIOD....... '88 LX Hatch With A Little Of This & A Little Of That...... 10.39 @128 MPH Soon to be faster.... | |
| | |
07-11-2009
|
#23 (permalink)
| | |
my next stang i will definitely build the suspension first. but its hard cause you always want to mess with the motor, or at least i do.
__________________ 1987 t-top gt
EFI 351w, trick flow heads | |
| | |
07-12-2009
|
#24 (permalink)
| | |
if you dont have a motor its not hard to mess with it haha 
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | |
08-28-2009
|
#25 (permalink)
| | |
i now have
9in ends
strange rear brakes
strange rear end cover
strange rear end yoke
strange rear 5/8 studs
4.10s
5 gallon fuel cell
33spline moser axles
aluminum radiator
new lug nuts
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | |
08-28-2009
|
#26 (permalink)
| | |
I'm gonna have to start my build thread when I go heavier.
__________________ 1988 Mustang GT 5.0
BBK 1 5/8th Ceramic Shorties, BBK O/R X Pipe, SLP LM1 Catback, K&N Panel Filter, MSD Blaster Coil, MSD Pro Billet Distributor, MSD Super Conductors, March Underdrive Pulleys, Weight Reduction, MT ET Streets, Electric Fan, Steeda Tri-Ax | |
| | |
08-28-2009
|
#27 (permalink)
| | |
ok....
what weight reduction have you done
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | |
08-28-2009
|
#28 (permalink)
| | |
Are you talking to me?
__________________ 1988 Mustang GT 5.0
BBK 1 5/8th Ceramic Shorties, BBK O/R X Pipe, SLP LM1 Catback, K&N Panel Filter, MSD Blaster Coil, MSD Pro Billet Distributor, MSD Super Conductors, March Underdrive Pulleys, Weight Reduction, MT ET Streets, Electric Fan, Steeda Tri-Ax | |
| | |
08-29-2009
|
#29 (permalink)
| | |
Quote:
Originally Posted by 88BlownGT Are you talking to me? | yes, you're the only person who has posted in my thread in a month
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | |
09-20-2009
|
#30 (permalink)
| | |
my work is done.
the front end is pretty much mocked up and the 5lug conversion is done.
im waiting on the rear end to be completed so she can be back on the ground
__________________ 87 Notch Project: POS
doing alot with a little
lightweight, stock motor, and 12's? | |
| | | |
