[5.0mustangaod]

Hey Guys, Just about to order a list of parts for my weekend toy. What do you guys think? Anything else I should order? This will be about the last time I take the motor apart. Next major mod will be a supercharger, so I only want to do this once trying to stay under $3000

BBK 70MM Throttle Body
Edelbrock RPM Intake
155 LPH Fuel Pump
24LBS Injectors
75mm Mass Air Meter
Speedo Cable
3:73 Speedo Gear
Edelbrock Head Bolts
Crane 1.6 1052 Roller Rockers
Crane Pushrods

Also have a set of Edelbrock Performer 60379 Heads that I already bought.

[steelers1377]

Originally Posted by 5.0mustangaod

Hey Guys, Just about to order a list of parts for my weekend toy. What do you guys think? Anything else I should order? This will be about the last time I take the motor apart. Next major mod will be a supercharger, so I only want to do this once trying to stay under $3000

BBK 70MM Throttle Body

good choice

Edelbrock RPM Intake

nice intake, rpm 2 is much better though...

155 LPH Fuel Pump

might as well get a 255 lph

24LBS Injectors

w/ a supercharger these wont work, but worry about that when you add the s/c

75mm Mass Air Meter

make sure its calibrated to 24lb injectors

Speedo Cable

ok
3:73 Speedo Gear

good choice

Edelbrock Head Bolts

sure
Crane 1.6 1052 Roller Rockers

nice rockers
Crane Pushrods

are they correct length? i know it may sound stupid, but a lot of ppl are not running the correct length.

Also have a set of Edelbrock Performer 60379 Heads that I already bought.

......................

[gostriderblack]

were is ur cam?? dont forget all the basic assembly lube, rtv, and gaskets... i installed my cams and forgot the head gaskets took a week to get um its so easy to forget the small stuff and maybe some new springs.. and id order a valve lashing set trough summit or who ever ur going through i couldnt find one in my town and had to turn valves by hand huge cramp in hand

[bigtang]

you don't need edelbrock brand head bolts, you can get the ARP bolts and use any of the head bolt bushings, like TFS, ARP or the edelbrocks.

as mentioned above check the pushrod length, checker is $12 at summit. good luck on finding the crane stuff though...

why not 1.7 rockers?

[5.0mustangaod]

Oh, I don't want to hear ANY back talk guys but I've got ab e303 already installed. Yeah I can get my gaskets and what not locally. Yeah I'll worry about everything else once I get the supercharger.

[EagleAutosports]

Overall, it's a good list of parts until you add the boost.

[5.0mustangaod]

Yeah! Should be 300 wheel horse with that combo then about 400 with boost I hope

[5.0mustangaod]

Hang on, could I go 1.7 rr with stock length pushrods