#1 permalink
Rookie
Joined: Feb 2009
Posts:
32
Threads:
8
Ottawa
Ontario
Anyone know where this goes? Hi Guys,
#2 permalink
Apprentice
Joined: Sep 2008
Posts:
246
Threads:
35
Marlton
New Jersey
the end part of the wire makes me think that its a ground. But the color is red which is unusual. Its should be black or green. Maybe someone else can chime in and verify that.
#3 permalink
Made Member
5.0L Member
Joined: Aug 2008
Posts:
1,350
Threads:
82
Lenoxville
Pennsylvania
probly goes where that hole in the radio support is and your missing teh screw looks like it does anyways
and i see some bare wires for your radio
__________________
1988 T-Topped GT 5 speed
#4 permalink
Made Member
Joined: Aug 2008
Posts:
326
Threads:
25
Davenport
Iowa
yeah it looks like it grounds right there
__________________
1990 lx 5.0
#5 permalink
Made Member
Joined: Jun 2008
Posts:
434
Threads:
12
Norton
Massachusetts
the wire looks like a aftermarket wire, a possible ground, pull the radio and see if it hook up to the harness
__________________
1993 LX 5.0 stock long block, 1.7 crane roller rockers, cobra valve springs, explorer intake upgrade, 65mm throttle body, 80mm maf ,Moroso CAI,Shorty BBK headers,BBK Adj fuel reg, BBK underdrive pulleys, electric fan, B303 cam, off-road Hpipe, 40series flowmasters, 3:73 gears, Alum drive shaft, King Cobra clutch, Pro 5.0 shifter, BBK gripp LCA,190lph fuelpump,Moates Burn2 Chip Programmer, with EEC-IV bank reader
#6 permalink
Forums Moderator
4.6L Member
Joined: Feb 2007
Posts:
34,278
Threads:
151
Graham
North Carolina
You've converted from a 1983 interior to a 1988? No telling where it goes then but based on the connector, it looks like it was used for a ground.
__________________
M O OG Certified Tech. For mods and sound clips, see profile and gallery . Member: NMRA Member: White Mustang Registry #362 Member: Fuzzy Dicer
#7 permalink
Made Member
5.0L Member
Joined: Oct 2007
Posts:
1,151
Threads:
56
Riverside
California
Always remember,
__________________
1990 LX, MAC CAI, C&L 76mm MAF, DIY ported upper, MAC 70mm T/B, BBK Equal length shorties, BBK O/R H-pipe, March U/D Pullies, Flowmaster American Thunder with Dumps, FRPP 4.10 gears, Electric Fan, 130 Amp Alt, FRPP Plug Wires, MSD Cap, MSD Coil, 14* Timing, 180* stat, BBK springs, Chrome pony's.
#8 permalink
Made Member
Joined: Aug 2008
Posts:
326
Threads:
25
Davenport
Iowa
yeah most oxygen sensors use a black wire for the signal lol go figure
__________________
1990 lx 5.0
#9 permalink
Top Dog
5.0L Member
Joined: Jan 2008
Posts:
4,625
Threads:
192
Norman
Oklahoma
Those are the wires for your Muffler Bearing sensors.
__________________
-1994 Mustang GT... K&N filter,GT 40 tubular intake, BBK Full Length Headers,modified midpipe & Flowmaster muffs , timing at 12 *. Best time- 14.74 @ 93.16 -Check profile for pics of our car collection! -Member of MBMCustoms - AmericanMuscle ROCKS!! - "Save a horse, drive a Mustang !"
#10 permalink
Apprentice
Joined: May 2009
Posts:
151
Threads:
11
New Milford
Connecticut
Quote:
Originally Posted by
302Feen Those are the wires for your Muffler Bearing sensors.
i thought that it was for your halogen fluids.
__________________
1993 lx hatch, 5 speed, all stock except k&n air filter and flowmaster mufflers
#11 permalink
Rookie
Joined: Feb 2009
Posts:
32
Threads:
8
Ottawa
Ontario
Ok Guys thanks for your responses and your humour! The car is put away for the winter now so I will give it a go when I have some more free time.
Thanks again,
Anyone know where this goes? 
