i'm thinking about going w an Eddy Performer intake and the guy also has an Eddy 75mm TB that he was running w the intake. i was wondering if anyone had an feed back about that TB. good or bad.
What do you have done to the car? You can infact go too big. With mild mods, 70mm is about as big as you would want. But if you are running 19# injectors, you dont need a 75mm TB
__________________
"Nitrous Oxide is like a hot chick with an STD. You want to hit it but you are affraid of the consequences."
91 GT convert. GT40P's, Off Road H-PIPE, Flowmasters, 4.10s, posi rear, welded subframes, 70mm TB, TFS Stage 1 cam, 155lph holley pump, Cobra intake mani, ford racing headers, Allum. Radiator, No smog, Freashly rebuilt......
I would say you def. dont need it. Not a 75mm. I have a 70mm and I have more than enough.... and look at my mods in my signature. Save your money and get like a 65mm. It would be good for your setup
__________________
"Nitrous Oxide is like a hot chick with an STD. You want to hit it but you are affraid of the consequences."
91 GT convert. GT40P's, Off Road H-PIPE, Flowmasters, 4.10s, posi rear, welded subframes, 70mm TB, TFS Stage 1 cam, 155lph holley pump, Cobra intake mani, ford racing headers, Allum. Radiator, No smog, Freashly rebuilt......
Depends on setup, I mean, if you are going to get a serious set of Canfield heads and a extreme cam, then you are going to need to up the injectors and get like a 70mm tb or larger. I honestly dont know what to say a TB is rated for, like a 65mm might be rated to 350hp to be effective, I dont know, but if you go to big, your throttle response wont be good. I have read people say they have "down sized from 70 to 65mm because they just werent getting what they thought was good out of ithe 70mm and noticed a big + dif. with the 65mm. But I believe everything I read on the internet. How much does the guy want for the 75tb. I still think thats too huge, I think you would need a stroked engine for that. Get another opinion on here, someone will post soon. I would say though that with a 65mm you would be fine with heads and cam. I have the 70mm and I kinda think its too much but it was on the car when I bought it so.
__________________
"Nitrous Oxide is like a hot chick with an STD. You want to hit it but you are affraid of the consequences."
91 GT convert. GT40P's, Off Road H-PIPE, Flowmasters, 4.10s, posi rear, welded subframes, 70mm TB, TFS Stage 1 cam, 155lph holley pump, Cobra intake mani, ford racing headers, Allum. Radiator, No smog, Freashly rebuilt......
looking for feed back on Edelbrock TB 
How much does the guy want for the 75tb. I still think thats too huge, I think you would need a stroked engine for that. Get another opinion on here, someone will post soon. I would say though that with a 65mm you would be fine with heads and cam. I have the 70mm and I kinda think its too much but it was on the car when I bought it so.
