Will any exterior parts from an 83-88 Tbird fit a Fox mustang ?
i have a strange question. i'm curious if the 83-88 thunderbirds extrior parts will bolt up with a 79-93 mustang. im only curious about the front end. like, the fenders, hood, front bumper cover.i was wondering if it was possible to swap the front off of a t bird and put it on a stang or vice versa. will the edge of the fender line up with the front of the door? i know most of the motor, and suspension bolt up, but what about the front? and how about door panels? i think t birds have longer doors. it looks like the t bird nose is longer, but theres nothing behind the front bumper, its just wasted space. let me know what ya think. has anyone tried it?
__________________
1998 SVT Cobra #4941 of 5174 built on June 19,1998
4.30s, Speedcal, WMS CAI, Pro 5.0 shifter, Sniper Tuner, March pulleys, Mac O/R H pipe, Flowmaster orig. 40's, King Cobra clutch, D/S rotors, FRPP 9mm's, Max. Motorsports C/C plates, Termy front control arms, H&R SS springs, MM solid steering rack bushings, Tokico HP struts and shocks, Mac subrames, HID Bi-Xenon 6000k kit, Saleen 18" wheels, Saleen S-281 spoiler, sequential tails
Up Next: Termi diff, 31 spline Axles, LPW girdle, MM LCAs
lol are you attempting to make a thunder stang... lol
__________________
go baby go.... gone...stock 5.0 short block gt 40x303 heads crane cobra 1.7 roller rockers ported lower intake kenne bell supercharger 70 mm edelbrock throttle body kenne bell 80 mm mass air with switch chip calibrated to 30 lb ford racing fuel injectors with bbk 190 lph fuel pump kenne bell ram air kit with a K&N filter MSD 6 al btm ignition with boost control bbk shortie headers bbk off road H-pipe with new o2 sensors flowmaster 3 chamber cat back exhaust maximum motorsportschassis/suspension
Ive been looking at some old t bird pics that I have and I dont think the hood will fit and the rest of the body is too long or wide. Drive the tbird until the wheels fall off.
Ive been looking at some old t bird pics that I have and I dont think the hood will fit and the rest of the body is too long or wide. Drive the tbird until the wheels fall off.
thank you for doing some research! if anything, the t bird body is wider. the extra nose length on the t bird was for cosmetic purposes only. if you pop the hood, there is a lot of empty space behind the bumper/in front of the radiator. no one knows for sure, huh?
__________________
1998 SVT Cobra #4941 of 5174 built on June 19,1998
4.30s, Speedcal, WMS CAI, Pro 5.0 shifter, Sniper Tuner, March pulleys, Mac O/R H pipe, Flowmaster orig. 40's, King Cobra clutch, D/S rotors, FRPP 9mm's, Max. Motorsports C/C plates, Termy front control arms, H&R SS springs, MM solid steering rack bushings, Tokico HP struts and shocks, Mac subrames, HID Bi-Xenon 6000k kit, Saleen 18" wheels, Saleen S-281 spoiler, sequential tails
Up Next: Termi diff, 31 spline Axles, LPW girdle, MM LCAs
1992 Deep Emerald Green Mustang GT Hatch, 5 speed, 2.73s, Mac fenderwell cold air intake, '93 Cobra MAF, Mac 70mm throttle body & spacer, Explorer intakes, Mac unequal headers & offroad pipe, Magnaflow catback, Walbro 110lph fuel pump, Jet adjustable FPR, MSD Blaster coil, Accel 8mm wires, FRPP aluminum quadrant, UPR firewall adjuster, stock cable, Granatelli upper control arms.
Waiting to go on: Granatelli lower control arms, and GT40 Iron heads!
1998 SVT Cobra #4941 of 5174 built on June 19,1998
4.30s, Speedcal, WMS CAI, Pro 5.0 shifter, Sniper Tuner, March pulleys, Mac O/R H pipe, Flowmaster orig. 40's, King Cobra clutch, D/S rotors, FRPP 9mm's, Max. Motorsports C/C plates, Termy front control arms, H&R SS springs, MM solid steering rack bushings, Tokico HP struts and shocks, Mac subrames, HID Bi-Xenon 6000k kit, Saleen 18" wheels, Saleen S-281 spoiler, sequential tails
Up Next: Termi diff, 31 spline Axles, LPW girdle, MM LCAs
Will any exterior parts from an 83-88 Tbird fit a Fox mustang ? 
