[timberland]

Hey I was wondering what yalls thoughts are on which intake is better or if they are about the same. The ones that I am talking about is the Trick Flow Heat and the Eldbrock Performer II right now I have the Trick Flow Heat but I have seen alot of people running the Performer and if you want this to consider into it I have the AFR 185 heads. Any opinons would be appericated thanks.

[ax0r]

i'd like to know the answer to that question too, i have the edelbrock performer so yea

[timberland]

Hey ax0r I don't think anyone has any input I have had it on here for a few days with no answer. Hey I have another question for you I have an AOD and I wanting to get a 3500 stall for it and I was wondering where you got yours from and if you have had good luck with it. Our motors sound alot alike mine is a 306 with 10.5 to 1 compression the only thing I see different is I have the Trick Flow upper and lower and the AFR 185 heads. Another question have you ran you car at the track and if so what was your times.

[ax0r]

www.ptcrace.com is where i bought my torque converter and last time i took it to the track if i tell you i think i would be lying because it was a long time ago i was doing 12.89's or something because i had no wheels i was running with the ponys but with old tires so i dont know i was planning on taking it on sat. to immokalee after work and just check i'll let you know if i go :thumbsup

[timberland]

Cool yea I have been to the track but I have not ran mine yet because I dont have a stall yet. but I have done some street racing and I am doing pretty good with that from like a 3,000 roll start but you know with alot of motor and a coupe body alot of spinning going on. I need to get some tires too I am thinking about the Mickey Thompsons ET Drag Radials. Let me know how your car runs Sat.
I am from Alabama so I will have to check them out thanks