here are the pics for the "update on my lx"thread.
i have new carpet comming in this week. i will get the rear carpet soon.
also the dash is comming out to put in a new heater core.yuk.
oh and bat reloc kit installed.
thanks for looking.
jay.
__________________
1990 black LX 5.0. 5spd pro 5.0 shifter.3.73's frpp stianless jet hot coated shorty headers. Pypes stainless mini catted x-pipe.Flowmaster A/M Thunder c/b. Hurst shifter handle and knob. fender well cold air intake.hid bulbs. new carpet. Summit battery relocation kit.stock engine,for now.currently undergoing restoration.its only the beginnig...
Not bad, any of that little rust you might as well get rid of and shoot some paint to seal the metal so it doesnt get worse, since you have the carpet out already. Thats what i did when i replaced my carpet.
__________________
1993 GT Hatch: 306 with Twisted Wedge heads,TFS stage one cam,TFS upper/lower intake, 190lph fuel pump, 30lb injectors, 70mm TB/EGR plate, Granatelli MAF= now using Pro-M, Lakewood upper/lower control arms, powertrax diff, subframe connectors, Eibach springs, aluminum ds, t56 trans, Eibach swaybars, Flowtech LT's, Magnaflow CB, 17x10.5 deep dish cobras in rear, 17x9 cobras in front.
Marine Detachment, Keesler AFB, Biloxi MS
OOORAAHH!!!
did you happen to find anything interesting under your carpet? I just had mine replaced and they found a small white t-shirt with a pink playboy logo under there somewhere
__________________
89' GT Ragtop.
-==-
Ford Racing "C" springs
SLP Loudmouths
Summit o/r x-pipe
BBK equal length headers
BBK strut tower brace
Chipped by DynoSources
-==-
Not bad, any of that little rust you might as well get rid of and shoot some paint to seal the metal so it doesnt get worse, since you have the carpet out already. Thats what i did when i replaced my carpet.
funny u should mention that. i just got some industrial rust inhibitor from my b-inlaw tonight. it will be going on tomorrow.
__________________
1990 black LX 5.0. 5spd pro 5.0 shifter.3.73's frpp stianless jet hot coated shorty headers. Pypes stainless mini catted x-pipe.Flowmaster A/M Thunder c/b. Hurst shifter handle and knob. fender well cold air intake.hid bulbs. new carpet. Summit battery relocation kit.stock engine,for now.currently undergoing restoration.its only the beginnig...
did you happen to find anything interesting under your carpet? I just had mine replaced and they found a small white t-shirt with a pink playboy logo under there somewhere
no. no shirts,but i did find alot of french fries and about $3.00 in change.lol.
__________________
1990 black LX 5.0. 5spd pro 5.0 shifter.3.73's frpp stianless jet hot coated shorty headers. Pypes stainless mini catted x-pipe.Flowmaster A/M Thunder c/b. Hurst shifter handle and knob. fender well cold air intake.hid bulbs. new carpet. Summit battery relocation kit.stock engine,for now.currently undergoing restoration.its only the beginnig...
jbspeed. do u have any problems with ur clutch cables burning from those l/t's?
i want to get some but i've been told that they burn the cables over time.even if they are ceramic coated.thanks.
jay.
__________________
1990 black LX 5.0. 5spd pro 5.0 shifter.3.73's frpp stianless jet hot coated shorty headers. Pypes stainless mini catted x-pipe.Flowmaster A/M Thunder c/b. Hurst shifter handle and knob. fender well cold air intake.hid bulbs. new carpet. Summit battery relocation kit.stock engine,for now.currently undergoing restoration.its only the beginnig...
No, no problem so far. I actually havent even noticed how close it is to the header. ill check it out but im sure if it is even close you could put a heat shield or heat wrap around the cable or something.
__________________
1993 GT Hatch: 306 with Twisted Wedge heads,TFS stage one cam,TFS upper/lower intake, 190lph fuel pump, 30lb injectors, 70mm TB/EGR plate, Granatelli MAF= now using Pro-M, Lakewood upper/lower control arms, powertrax diff, subframe connectors, Eibach springs, aluminum ds, t56 trans, Eibach swaybars, Flowtech LT's, Magnaflow CB, 17x10.5 deep dish cobras in rear, 17x9 cobras in front.
Marine Detachment, Keesler AFB, Biloxi MS
OOORAAHH!!!
1990 black LX 5.0. 5spd pro 5.0 shifter.3.73's frpp stianless jet hot coated shorty headers. Pypes stainless mini catted x-pipe.Flowmaster A/M Thunder c/b. Hurst shifter handle and knob. fender well cold air intake.hid bulbs. new carpet. Summit battery relocation kit.stock engine,for now.currently undergoing restoration.its only the beginnig...
Yeah, im sure if you just use either that aluminum tape or the heat wrap they use for wrapping headers around any spot that runs near the header, it should be ok I would think.
__________________
1993 GT Hatch: 306 with Twisted Wedge heads,TFS stage one cam,TFS upper/lower intake, 190lph fuel pump, 30lb injectors, 70mm TB/EGR plate, Granatelli MAF= now using Pro-M, Lakewood upper/lower control arms, powertrax diff, subframe connectors, Eibach springs, aluminum ds, t56 trans, Eibach swaybars, Flowtech LT's, Magnaflow CB, 17x10.5 deep dish cobras in rear, 17x9 cobras in front.
Marine Detachment, Keesler AFB, Biloxi MS
OOORAAHH!!!
yeah well i say YUK again b/c i'm putting the heater core in saturday lol.not looking forward to it. but all i have to do is drop the dash. everythingelse,as u can see is out of the car.oh and i have to drop the steering column. i'm trying to do a tilt wheel conversion while i'm there. still research that one though. do it right the 1st time.right??
__________________
1990 black LX 5.0. 5spd pro 5.0 shifter.3.73's frpp stianless jet hot coated shorty headers. Pypes stainless mini catted x-pipe.Flowmaster A/M Thunder c/b. Hurst shifter handle and knob. fender well cold air intake.hid bulbs. new carpet. Summit battery relocation kit.stock engine,for now.currently undergoing restoration.its only the beginnig...
here are the pics for the "update on my lx"thread. 
now using Pro-M, Lakewood upper/lower control arms, powertrax diff, subframe connectors, Eibach springs, aluminum ds, t56 trans, Eibach swaybars, Flowtech LT's, Magnaflow CB, 17x10.5 deep dish cobras in rear, 17x9 cobras in front.
