95/5.0 Long tube headers, xpipe, flowmasters, with dumps, 9mm plugg wires, msd cap and rotor, 70mm tb, trick flow intake manifold, under drive pullys, smog elim kit. summit coil, subframe connectors, summit double roller timing chain, and a cam not sure what for cam bc it was in the car when i purchesed it!
or is it better to go with one of the $400 ones???
__________________
95/5.0 Long tube headers, xpipe, flowmasters, with dumps, 9mm plugg wires, msd cap and rotor, 70mm tb, trick flow intake manifold, under drive pullys, smog elim kit. summit coil, subframe connectors, summit double roller timing chain, and a cam not sure what for cam bc it was in the car when i purchesed it!
there is only one that is good for street car they can last long, but they don't last forever. . its like maziere water pump. your gonna also need a new belt to fit it.
10 hp gain but at a cost of 500 hundred dollars.
__________________
DSS 331 stroker, AFR 185 heads, Performer rpm 2 intake, Accufab 75 mm race TB, 30lb injectors, 80 mm Pro-M mass air, Extreme energy cam 266.
Anderson ford power pipe the big one, Ford motor sport shorty headers, Bassani x pipe custom cat back with flows, World class T5, center force duel friction clutch.
Personally I wouldnt use the "electric drive" kits. I would rather get an actual electric pump. I know they make them for the 4.6 and 5.4 mod motors but i havent seen any for the 5.0.
__________________
1993 GT Hatch: 306 with Twisted Wedge heads,TFS stage one cam,TFS upper/lower intake, 190lph fuel pump, 30lb injectors, 70mm TB/EGR plate, Granatelli MAF= now using Pro-M, Lakewood upper/lower control arms, powertrax diff, subframe connectors, Eibach springs, aluminum ds, t56 trans, Eibach swaybars, Flowtech LT's, Magnaflow CB, 17x10.5 deep dish cobras in rear, 17x9 cobras in front.
Marine Detachment, Keesler AFB, Biloxi MS
OOORAAHH!!!