 Bench bleeding master cylinder
Ok.. the MC has THREE ports, 2 on the side and one on the bottom for the driver side front caliper. My question is.. when bench bleeding, do I have to put caps on all 3, or just the 2 on the side or what? I tried just putting the 2 on the side ports, filled it with brake fluid and I had fluid running down the vice onto a desk(This aint my house so I dont want a huge mess) So is that bottom port supposed to be blocked too or what?
And another thing I don't get, If I'm supposed to block the bottom one too, then why didn't I get another hose with the bleeder kit?
__________________ Traded: 1986 GT, 5spd, 92k miles
BBK 1 5/8 shorty headers, BBK Offroad H-Pipe, Flowmaster American Thunder catback, 5" Monster Tach with Shiftlight.
Current Ride: 1991 GT, AOD, BBK headers, BBK H-pipe, Dynomax mufflers, 3.27 gears, ported E7 heads, JE Nitrous pistons, hardened pushrods, scat steel crank, CAI kit, 255lph fuel pump. Yada Yada Yada.. | 
