pedal cover install questions?

89stang · 03-10-2003

I have recently purchased the aluminum pedal covers that have the gt engraved into them. They came with no instructions. Does anyone know exactly what to do or a web site for instructions on how to properly install these? I want to make sure I do it right.

IrOnn94gt · 03-10-2003

i have racing pedals on mine, they aren't that hard to install. mine had like too litte arms on the back which wrapped around the pedal and then just tightned it. let me know, i can take pictures of mine and post them

89stang · 03-10-2003

Mine use tiny little computer screws. Do I need to remove the rubber to install my alluminum covers.

IrOnn94gt · 03-10-2003

ya take the old rubber crap off, then it should be easy

dracko712 · 03-13-2003

If they are like the MAC ones, you will need to take the rubber pedal cover off, drill the holes in, and screw the new ones on...

Did your kit have a drill bit and screws?

89stang · 03-14-2003

dracko712 · 03-15-2003

Then you need to remove the rubber covers, drill 4 holes into each pedal, and screw them on..... The gas pedal is plastic, so goot luck getting those littler screws to saty.... do not overtighten them.....