[adabiri2]

Driver axle pushes in and out too much(towards pass. side).

Almost 1/4".

Pass side is fine.


Is this a symptom of something in differential? Can you shim?

When I replace the bearing on that side soon, I bought a new (cross)center pin from Motorcraft for insurance.
Can that cause this?





Thanks everyone for dedication!

[Mustang_Crazy69]

good question mine does the same thing

[lxarlo]

the O ring on the axle shaft probably wore out.

[EagleAutosports]

Could be the o ring, could be the c clip.