EFI valve covers that will clear roller rockers

xchpstang · 04-23-2002

Does any one know of valve covers that will clear roller rockers but will keep the hose that connects from the throttle body to the oil fill cap? I need this to pass an emissions visual test in CA. I am using Comp Cams 1.7 aluminium roller rockers.

Jarrett · 04-23-2002

There are no aftermarket valve covers that I know of that will provide this tube. Why don't you just unbolt the baffle inside the stock valve covers to allow them to clear the roller rockers.

EricD · 04-23-2002

Ok heres something you can look into. It's just an idea. Get the tall aluminum ford valve covers. Get a breather for the cover. Put it were the filler cap would go. Get a long tube extention breath though. I will look like the filler neck on the stockers. Dill and tap a fitting to the side. Run a hose to the throttle body from there. It's an idea. It might look like :ooh::ooh::ooh::ooh::ooh: but take it off when you pass and get your sticker. It only an idea!

gofazt2 · 04-24-2002

Unbolting the baffle should clear your rockers. That is what I have done on several Mustangs and I have had no problems.