[5.0mustangaod]

Which roller rocker arms do you guys recommend with Edelbrock Performer 60379 heads, what supporting upper and lower intake will make the most out of these heads. Ive also got a E303 cam. Also, do i need hardened pushrods with these heads?

[MUSTANGPAT93]

I would reccomend 1.7 crane roller rockers. Should do the job just fine. As for pushrods the stock ones will work but i do recommend hardened pushrods. Hope this helps you out.

[cindys_sn95]

you do know the 60379s are designed to use pedistal rocker arms?

[5.0mustangaod]

yes, my question is what rocker arms would i need to make this work.

[cindys_sn95]

there are several pedistal type roller rockers available.

[MUSTANGPAT93]

I believe you can still use roller rockers even if they are pedistal mount

[MUSTANGPAT93]

I ran the stock crane roller rockers on my 94 cobra and when i got my rpm heads they bolted up with no problem.