[mustangpat83]

Hello, i have a 90 mustang and i have eliminated my smog pump and i want to eliminate my ac and i was wondering if it is possible to elimnate my ac without puting a pulley in its place?

[97stang3.8]

if you still have the power steering then you should be good, they are both on the same side of the crank pulley. all you would need is shorter belt

[domindart]

I beleive I saw someone do it, the belt will barely clear, but Im going to buy the power stering relocation brackets cause its more common to do it that way, its nicer.

[mechanic1025]

yeah im pretty sure you can leave the p/s pump where it is and just get a shorter belt or you can get the ford racing a/c elimator which relocates the p/s pump to where the a/c was, i did it. PM me with any questions, i also have pics of it..

[domindart]

sending u ^^ a pm, Id like to get a pic for when I install, or does decent instructions come with it?

[mechanic1025]

ok ill just pm you rather than explaining on this post.

[mustangpat83]

if i were to use the ford racing a/c eliminator kit, do you know what size belt i would need?

[JUSTANG5PNT0]

I just finished installing the ford racin a/c eliminator bracket your talking about and the size belt you need is 84.5!

[mechanic1025]

its not 84.5 if you have the smog deleted too.. depending on how you route it this diagram should help.

[5.0stangluvr]

If it's possible to bypass the smog pump and A/C without interference you can use a belt from a mid to late 90's Audi A6. it is 73" or 74" long and utilizes the p/s pump.

I am goin to try it tomorrow morning if anybody wants to know if it works. I have underdrive pulleys, and removed A/C and smog pump.