So i pulled the drain plug and a whole milk shake come out, and by that i mean that the oil is super milky. I have already replaced the head gaskets, with the number 8 cylinder being the one that was blown out. so with that said what the heck! F*** is wrong with my car? I am tired of milk shake all over my garage floor after a change!
My guess is either the heads or deck are warped or the block is cracked at the water jacket ports.
The only way you get a milkshake out of the oil pan is if the coolant and oil are mixing.
Richard
Tech Support
Tremec TKO, T45 & T56 Transmission Systems
Go with PI heads and quit watching The Fast and the Furious. (thanks 2 IhaveadopeGT)
Remember, it is almost impossible for anyone, myself included, to diagnose a problem over the internet without seeing the car. My advice is simply that, advice based on years of experience. I don't want you or anyone taking my word as gospel. I am trying to give some direction as to what I think may be happening.
You did have the block and heads decked for flatness after the other head gasket blew didn't you? If not, then one or both of them could be warped or cracked.
__________________
MOOG Certified Tech. For mods and sound clips, see profile and gallery.
Ask me why I ran "only" a 13.54.
Member: NMRA Member: White Mustang Registry #362 Member: Fuzzy Dicer
so yeah i added the cherry this weekend and not a bad combo! haha jk
but as far as the tephlon past i didtn do that considering i dont know what that is. and as far as them being warped? i dont think so. i know that even if they are off a little they will still "fail" but i made sure all surfaces were clean and every thing so the seal would be good. could it be anything other than the heads?
why is my mustang a milk shake machine??? 
(thanks 2 IhaveadopeGT)
