[brendanryan0510]

I bought a 1987 Mustang GT just after thanksgiving of 2008. when we looked at it we realized that the power locks did not work. although i really dont care if they work or not, i cant help but think about trying to figure out the problem and fixing them. has this problem ever occured with someone else? how did you fix it?

[1989gtfifty]

im still working on the same problem on my 89 ive replaced fuses swapped switches i think these years had a problem with losing connection in the door jams i just have had time to tear into it yet you may want to just start from the button and work your way into the car after checking fuses first

[90 stock stang]

try the lock acctuator inside of the door. 5.0 resto sells a repair kit. Or it may be your switch has corrosion and needs to be cleaned.

[LYinKansas]

Do you hear the lock click when you push the button? If you do then all you probably have to do is re-connect the rod to the actuator. If you don't hear it then all you've got to do is replace the actuator or check the connections, not too hard.

[306LX]

If you don't hear a click in the switch that's probably the issue. The contacts can be cleaned inside the switch and it will work like new. If the locks haven't been used in a while the actuators could be stuck and will need replaced. I would star with the switches!

[STINGREY]

check to make sure the breaker is operable.