#1 permalink
Apprentice
5.0L Member
Joined: May 2003
Posts:
243
Threads:
45
Pittsburgh
Pennsylvania
Making The List, What Head Bolts And Gaskets?? trying to get everything together that i will need to put P heads on my
stang in a few months.. what is a good head gasket that i can use and not have to worry about blowing?? and do i need head bolts, or studs, or both?? and if anyone has the arp part #'s i'd appreciate it,, theres alot of choices on summit and i have no idea which ones i'll need. And i have the cobra intake on my car,,, where can i get the upr to lwr gasket at?? thanks for any help guys...
__________________
87 GT 5sp- DSS306, sc trim@8#, afm power pipe, 80mm pro-m, 30's, crower 511 cam,cobra intake, P heads, 1.6rr's, FMS headers, FMS 3.73's 430@flywheel
#2 permalink
Top Dog
5.0L Member
Joined: Aug 2002
Posts:
5,091
Threads:
164
Edinburg
Texas
ARP-154-3601 head bolts and washers
link here
Here are the gaskets I used when I did my P swap.
Link here
Fel pro #1045 FPP-1046
Upper to lower gt40/cobra gaskets
Link here
__________________
89 GT Hatch: Custom M90 Supercharged w/ Ported Trickflow Trackheat Heads, Stage 1 cam, Streetheat lower / Sheet metal upper, Tweecer RT & PLX Wideband, 75mm TB, 1.6 Roller rockers, 3.73s, MSD 6a, Canton 7qt Pan+ Windage tray, 36LB Injectors, 200 amp Alternator, 75mm Pro-Mas MAF, 190lph fuel pump,Spec Stage 1 Clutch,SouthSide LCA's, Pro 5.0 Shifter, Steeda CC Plates / Springs, FMS Aluminum Driveshaft, New T5 w/ 2.95 first gear, Underdrive pullies, Zirgo 3300Cfm Elec. Fan, AFCO alum. radiator
#3 permalink
Apprentice
5.0L Member
Joined: May 2003
Posts:
243
Threads:
45
Pittsburgh
Pennsylvania
thanks alot ghost,,and i didnt think head gaskets would be that much.. would these suffice instead?? kinda on a LOW budget
gaskets
__________________
87 GT 5sp- DSS306, sc trim@8#, afm power pipe, 80mm pro-m, 30's, crower 511 cam,cobra intake, P heads, 1.6rr's, FMS headers, FMS 3.73's 430@flywheel
#4 permalink
Top Dog
5.0L Member
Joined: Aug 2002
Posts:
5,091
Threads:
164
Edinburg
Texas
Those are priced $30 each and mine are priced $86 per pair. Not a whole lot of savings.
__________________
89 GT Hatch: Custom M90 Supercharged w/ Ported Trickflow Trackheat Heads, Stage 1 cam, Streetheat lower / Sheet metal upper, Tweecer RT & PLX Wideband, 75mm TB, 1.6 Roller rockers, 3.73s, MSD 6a, Canton 7qt Pan+ Windage tray, 36LB Injectors, 200 amp Alternator, 75mm Pro-Mas MAF, 190lph fuel pump,Spec Stage 1 Clutch,SouthSide LCA's, Pro 5.0 Shifter, Steeda CC Plates / Springs, FMS Aluminum Driveshaft, New T5 w/ 2.95 first gear, Underdrive pullies, Zirgo 3300Cfm Elec. Fan, AFCO alum. radiator
#5 permalink
Apprentice
Joined: Apr 2002
Posts:
141
Threads:
1
St-Eustache
Quebec
1011-2 are exellent head gaskets
__________________
Tom...TK Race Heads...www.tkrace.com
#6 permalink
Apprentice
5.0L Member
Joined: May 2003
Posts:
243
Threads:
45
Pittsburgh
Pennsylvania
they are both listed as sold individually??
__________________
87 GT 5sp- DSS306, sc trim@8#, afm power pipe, 80mm pro-m, 30's, crower 511 cam,cobra intake, P heads, 1.6rr's, FMS headers, FMS 3.73's 430@flywheel
#7 permalink
Rookie
Joined: Dec 2003
Posts:
3
Threads:
1
Newark, ohio
Just so you guys' know you can get the cobra/gt40 intake gaskets at your local autozone or advanced auto. Most of the time they don't have the cobra gaskets. But i believe it was a 1995 lightening that had a gt-40 intake, parts guy at advanced told me that an they actually had one in stock for the lightening
Making The List, What Head Bolts And Gaskets?? 
