AFM Web

Go Back   Ford Mustang Forums > Mustang Forums > 5.0 Mustang > 5.0L Tech
Welcome to AllFordMustangs.com. We look forward to you registering on our forum and making your first post.
Introductions | Mustang Lounge | 5.0 Talk | 5.0 Tech | 94-95 Tech | Mustang Tech | Racing | Regional

Reply
 
Old 06-25-2002   #1 (permalink)
md1
md1 is offline Apprentice

4.6L Member


Joined: Apr 2002
Posts: 210 Threads: 98
 md1's Country Flag
Danville   Virginia
Default Need Speedo help

Ok I installed the APC 140 MPH white gauges. I know I can send the speedo to Brothers and they will calibrate it. I call and they yes the web page said $39 to do it but it could run $129 just for labor. I heard I could install a 89- 94 speedo ( just the speedo not the temp oil and others) just take mine out and put in the replacement one. I cannot find a 89 – 94 Mustang at any of the local junk yards. Will any other Ford model speedo work in its place?
Thanks
__________________
2003 Mustang GT 3.73, Kenne Bell 2.1 Intercooler @ 10lbs 90mm MAF, 75mm TB, cold air kit, switch chip. 426 rwhp, 446 rwtq in shoot out mode,MMS caster camber plates, lower control arms and SFC
md1 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-08-2002   #2 (permalink)
GTRaptor is offline Member

4.6L Member


Joined: Apr 2002
Posts: 5,629 Threads: 152
 GTRaptor's Country Flag  View GTRaptor's 605 photos  View GTRaptor's 69 products for your review  View GTRaptor's HomePage
Mexico City
Send a message via Yahoo to GTRaptor
Default

Don't know, i guess some might work.
Have you tried searching the web?
It is more less a popular mod, there should be some info in the net.
__________________
Rob Hernandez, AFM
GTRaptor is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 08-05-2002   #3 (permalink)
Lone_Star is offline Apprentice

5.0L Member


Joined: Jul 2002
Posts: 161 Threads: 33
 Lone_Star's Country Flag
Dallas   Texas
Default

mark,
try mustang parts specialties they have lots of parts, but seem a little expensive on some of the things I have looked at. The web address is www.mustangpartsspecialties.com. Give them a try.
__________________
88 Mustang Gt
Tremec 3550
Iskendarian camshaft 265/275
Ford Aluminium three core radiator
Vat & Magnaflux block and heads, bore surface and hone block .30 over
grind crankshaft, recondition rods, install new valve guides, valve job
pcv valve grommet, bosch ignition wires, Intake and exhause valves.
Ford 302 engine kit: Pistons,rings,rod & main bearings,cam bearings,fel pro gasket set,3 piece timing set,oil pump and freez plugs,valve springs intake and exhaust
Lone_Star is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford Needs Saving tripleblack Hot Zone 1111 5 Days Ago 01:15 PM
Tracking your Car Build and Shipping Dates wantonebad05 2005-2009 Mustang Talk 5551 09-10-2009 05:58 PM
the first kill in my Stang (about a week after I bought it) AgentSteel53 Kill Stories 96 02-26-2009 12:12 AM
Dealers Adding $3K to MSRP of 2005 Mustangs - Your Opinion Please Glen 2005-2009 Mustang Talk 96 12-14-2008 01:47 PM
Ford to increase Mustang production bigplayrayr 2005-2009 Mustang Talk 2 03-18-2005 02:28 AM

sponsors

Mustang Photos
Add to Favorites    Link to us    Contact    Directory    Site Rules    Archive    Terms of Use    Privacy    Top Sites    RSS    Meet Our Sponsors    Advertise   
AllFordMustangs is not affiliated with or endorsed by Ford Motor Company. ©Copyright 2002-2010 All Auto Enthusiasts Network

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112