is this a head cam intake combo? can you also list what the aprts are. some of us don't know part numbers by heart.
__________________
StAnGaHoLiC
'95GT, S Trim, 306, AFR 185's, RPM intake, XE270HR cam, and the rest of the bolt ons.
Best run to date with old combo: 12.2 @ 116mph w/ 1.78 60' on ET Streets.
www.flowtechinduction.com <--- He knows cams!
BBK-1557 - BBK Cold Air Intake
BBK-1562 - BBK Off road H pipe
BBK-1553 - BBK Underdrive pullies
HLY-300-72S - Holley SysteMax upper and lower intake
TFS-51400003 - Trickflow Twist wedge heads
EDL-3825 - Edelbrock 70mm Throttle body
FMS-M9593B302 - 30 lb/hr fuel injectors
FMS-M-9407-C50 190 Lph fuel pump
First of all, why spend a grand on cylinder heads and use an intake it wasn't designed with ? I would get a street heat or track heat intake manifold. I would also recommend doing the camshaft while you have all that off.
Just to keep it the same brand , I would get the 70mm EGR Spacer (TFS-515EGR70).
For the throttle body is your call.
I would get a 255 lph fuel pump while you are at it.
the part number you put down is for the TFS R intake. That is too big for what you have Go with the street or Track heat. Also I would use a 65mm TB. As for the chip, what year isyour car? If it is a 94/95 I would definetly get a custom tune. if it is a fox body, you might be able to get away with not aveing to get a custom tune if you go with a small cam, like the TFS stage 1 cam.
__________________
StAnGaHoLiC
'95GT, S Trim, 306, AFR 185's, RPM intake, XE270HR cam, and the rest of the bolt ons.
Best run to date with old combo: 12.2 @ 116mph w/ 1.78 60' on ET Streets.
www.flowtechinduction.com <--- He knows cams!
i have a 94', would i need to get this if I were to get the trickflow kit?
you are going to need to get that if you go with any aftermarket intake. the only one you will not need it for is a 94/95 cobra intake. Since your car is an automatic, I would get that TFS kit you on your other post, a shift kit, gears, and YES a tune, find a loacl SCT dealer. Trust me, you car will run like crap with all the mods you plan on doing, our computers hate major mods, like cam changes. good luck on the build.
__________________
StAnGaHoLiC
'95GT, S Trim, 306, AFR 185's, RPM intake, XE270HR cam, and the rest of the bolt ons.
Best run to date with old combo: 12.2 @ 116mph w/ 1.78 60' on ET Streets.
www.flowtechinduction.com <--- He knows cams!
what do i get in a shift kit? what gears do you reccomend?
as far as the shift kit goes, hopefully a guy with an auto can help you out. For the gears I would proably go with 4:10's.
__________________
StAnGaHoLiC
'95GT, S Trim, 306, AFR 185's, RPM intake, XE270HR cam, and the rest of the bolt ons.
Best run to date with old combo: 12.2 @ 116mph w/ 1.78 60' on ET Streets.
www.flowtechinduction.com <--- He knows cams!
what do i get in a shift kit? what gears do you reccomend?
Shift kit- B&M Transpak
Gears- Since you have a aode i say 4.10s cuz u have O.D.
If i was you i would just get the trick flow kit come with twisted wedge heads, upper lower intakes, cam, roller rocker, valve covers etc...
and a 65mm throttle body
30# injectors are good but the higher the injector the worse your gas im almost positive with that setup 24s would be enough deffinetly get a 255lph fuel pump (this will not lower your gas milage but will give you a horizon to expand on...)
What Chip do you recommend? 
