[jayslow1685]

aight well i finally finished my car decided to change my mind, right now i have a complete fuel injection setup and have a couple questions about swapping.
1. what parts will i need to do the swap
2. i already have an a1000 pump, could i still use the stock wiring or will i have to buy the aeromotive pump controller.

3. what would be the best carb for my setup, 347, afr185 ported, anderson cam, 11.1 comression, im looking to go all out as a drag car.

[Fordgazm]

You'll need an intake , carb , and probably a new fuel pump and regulator , a new distributor with the correct gear for a roller cam , a throttle cable from an 85 mustang . Is your car an auto or a stick ? I would use a 750 speed demon carb for that setup .

[jayslow1685]

yeah thats the exact carb i just ordered. btu the one question i need answered is for the fuel pump, i can still use my pump and i ordered my new regulator, but what abotu tthe wirirng for the pump, do i have to just run a switch to it,