Which cars have 5 lug rotors that I can bolt onto my Mustang?
I have already done the 5 lug conversion on my car. I had a brain fart and I can not remeber nor can I find all the info for the 5 lug donors. I know the rotors are off a Lincoln Mark VII but I can not remember what year. So my question is what year Mark VII rotors will fit my car?
My rotors are warped and I need new one sand I do not want to get the wrong ones and have to make extra trips for a screw up. Just curious if anyone might be able to help me out.
Thanks
Drew
__________________
If I take cars and hot girls with money and add them to my life, I have found the key to happiness!
87 GT (UNDER CONSTRUCTION) new paint job, 306 w/ TFS stage 1 cam, TFS intake , still cant decide on heads.
bolt patern should be 5x4.5 if that helps, it's a ford patern, i think the only other 5 bolt they had was 5x5.5 and thoes are only on full size trucks, ie f-150's f-250's? e-150's bronco's expedition's... (explorer i think has 5x4.5)
__________________
89 fox, mostly stock, C&L 73mm MAF, bypassed coolant hoses to egr spacer, intake silencer removal, no a/c, all options but power mirrors?? blown cats, msd cap and rotor, bosch wires, autolite plugs, 5 inch auto gauge tach with recal and blue lensed shift light, PAPER FILTER I BOUGHT ONE!!!!!!! felpro gasgets on everywhere accept oil pan and a nice big classic mustang decal on my back window
I have already done the 5 lug conversion on my car. I had a brain fart and I can not remeber nor can I find all the info for the 5 lug donors. I know the rotors are off a Lincoln Mark VII but I can not remember what year. So my question is what year Mark VII rotors will fit my car?
My rotors are warped and I need new one sand I do not want to get the wrong ones and have to make extra trips for a screw up. Just curious if anyone might be able to help me out.
Thanks
Drew
It probably wont matter to you since you have done the swap already, but you have to be careful of wheel choices because some may not allow you to fit the center caps on.
I am converting my 1986 LX to 5 lug. I checked out the site you refered, but the ranger rotor bearings are diff than the Mustang
Did also change spindles? Any help is appreciated