Water Temp. Gauge

FNA321 · 10-07-2005

Having trouble installing my water temp. gauge it is an Autometer Sport Comp 140-280' gauge. What i thought was the sending unit to the stock gauge did not fit the Autometer gauge at all. Any tips on how to solve my problem would be helpful.

STINGREY · 10-07-2005

you will need the correct pipe fittings,get them from home depot.one to fit the intake and another so the temp sensor will fit into it.

FNA321 · 10-07-2005

Thats what I thought but wasn't sure...

thanks

Grn91LX · 10-26-2005

If its a mech. gauge, you will need a 3/8ths fitting to screw into the lower manifold, ( the gauge comes with 1/2" I think) then you'll be all set. If you need part numbers for any of the fittings let me know, I have em all handy somewhere. PM if need be.

Matt